Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 73
Telnet, Secure Telnet SSH, Secure HTTP HTTPS, Permit, Interface, Source IP Address, Network Mask
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Configuring Device Security Defining Access Methods 4 - All - Assigns all management methods to the rule. - Telnet - Assigns Telnet access to the rule. If selected, users accessing the device using Telnet meeting access profile criteria are permitted or denied access to the device. - SNMP - Assigns SNMP access to the rule. If selected, users accessing the device using SNMP meeting access profile criteria are permitted or denied access to the device.Secure Telnet (SSH) - Assigns SSH access to the rule. If selected, users accessing the device using Telnet meeting access profile criteria are permitted or denied access to the device. - HTTP - Assigns HTTP access to the rule. If selected, users accessing the device using HTTP meeting access profile criteria are permitted or denied access to the device. - Secure HTTP (HTTPS) - Assigns HTTPS access to the rule. If selected, users accessing the device using HTTPS meeting access profile criteria are permitted or denied access to the device. • Interface - Defines the interface on which the access profile is defined. The possible field values are: - Port - Specifies the port on which the access profile is defined. - LAG - Specifies the LAG on which the access profile is defined. - VLAN - Specifies the VLAN on which the access profile is defined. • Source IP Address - Defines the interface source IP address to which the access profile applies. The Source IP Address field is valid for a subnetwork. • Network Mask - Determines what subnet the source IP Address belongs to in the network. • Prefix Length - Defines the number of bits that comprise the source IP address prefix, or the network mask of the source IP address. • Action - Defines the action attached to the rule. The possible field values are: - Permit - Permits access to the device. - Deny - Denies access to the device. This is the default. STEP 3 Define the relevant fields. Cisco Small Business SFE/SGE Managed Switches Administration Guide 64