Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 331
SNMPv3 Notification Recipient, Inform, No Authentication, Privacy
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 331 highlights
Configuring SNMP Defining Trap Management 12 • Filter Name - Indicates if the SNMP filter for which the SNMP Notification filter is defined. • Timeout - Indicates the amount of time (seconds) the device waits before re- sending informs. The default is 15 seconds. • Retries - Indicates the amount of times the device re-sends an inform request. The default is 3 seconds. The SNMPv3 Notification Recipient table area contains the following fields: • Recipients IP - Indicates the IP address to whom the traps are sent. • Notification Type - Defines the notification sent. The possible field values are: - Trap - Indicates traps are sent. - Inform - Indicates informs are sent. • User Name - Displays the SNMP user names. • Security Level - Defines the means by which the packet is authenticated. The possible field values are: - No Authentication - Indicates the packet is neither authenticated nor encrypted. - Authentication - Indicates the packet is authenticated. - Privacy - Indicates the packet is both authenticated and encrypted. • UDP Port - Displays the UDP port used to send notifications. The default is 162. • Filter Name - Defines if the SNMP filter for which the SNMP Notification filter is defined. • Timeout - Indicates the amount of time (seconds) the device waits before re- sending informs. The default is 15 seconds. • Retries - Indicates the amount of times the device re-sends an inform request. The default is 3 seconds. STEP 2 Click the Add button. The Add SNMP Notification Recipient Page opens. Cisco Small Business SFE/SGE Managed Switches Administration Guide 322