Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 346
Managing Power-over-Ethernet Devices, PoE Settings Enable, Disable, Critical
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 346 highlights
Managing Power-over-Ethernet Devices Defining PoE Settings 14 STEP 1 Click Bridging > Port Management > PoE Settings. The PoE Settings Page opens: PoE Settings Page The PoE Settings Page displays the currently configured PoE ports and contains the following information: • Port - Displays the selected port number. • Admin Status - Indicates whether PoE is enabled or disabled on the port. The possible values are: - Enable - Enables PoE on the port. This is the default setting. - Disable - Disables PoE on the port. • Priority - Indicates the PoE port priority. The possible values are: Critical, High and Low. The default is Low. • Power Allocation (mW) - Indicates the power in milliwatts allocated to the port. The range is 3,400 -15,400. • Power Consumption (mW) - Indicates the amount of power in milliwatts assigned to the powered device connected to the selected interface. STEP 2 Click the Edit button. The Edit PoE Settings Page opens: Cisco Small Business SFE/SGE Managed Switches Administration Guide 337