Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 290
Edit Bandwidth Configuring Quality of Service
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 290 highlights
Configuring Quality of Service Defining General Settings 11 - Rate Limit - Defines the rate limit for ingress ports. Defines the amount of bandwidth assigned to the interface. For FE ports, the rate is 62 - 100,000 Kbps. For GE ports, the rate is 62 - 1,000,000 Kbps. • Egress Shaping Rates - Indicates the traffic shaping type, if enabled, for egress ports. The possible field values are: - CIR - Defines Committed Information Rate (CIR) as the queue shaping type. The possible field values are: For FE ports, the rate is 64 - 62,500 Kbps. For GE ports, the rate is 64 - 1,000,000 Kbps. - CbS - Defines Committed Burst Size (CbS) as the queue shaping type. CbS is supported only on GE interfaces. The possible field value is 4096 - 16,769,020 bytes. Modifying Bandwidth Settings STEP 2 Click the Edit button. The Edit Bandwidth Page opens: Edit Bandwidth Page The Edit Bandwidth Page contains the following fields: • Interface - Indicates whether the interface, for which bandwidth settings are edited, is a port or a LAG. • Enable Egress Shaping Rate - Indicates if shaping is enabled on the interface. The possible field values are: - Checked - Enables egress shaping on the interface. - Unchecked - Disables egress shaping on the interface. Cisco Small Business SFE/SGE Managed Switches Administration Guide 281