Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 304
Modifying the QoS Policy Profile, Single, Out of Profile DSCP, Policy Table
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 304 highlights
Configuring Quality of Service Defining Advanced QoS Mode 11 defined if the policer is shared with multiple classes. Traffic from two different ports can be configured for policing purposes. An aggregate policer can be applied to multiple classes in the same policy map, but cannot be used across different policy maps. - Single - Configures the class to use manually configured information rates and exceed actions. • Aggregate Policer - Specifies the Aggregate Policer Name • Ingress Committed Information Rate (CIR) - Defines the CIR in Kbps. This field is only relevant when the Police value is Single. • Ingress Committed Burst Size (CS) - Defines the CS in bytes. This field is only relevant when the Police value is Single. • Exceed Action - Action assigned to incoming packets exceeding the CIR. This field is only relevant when the Police value is Single. Possible values are: - Drop - Drops packets exceeding the defined CIR value. - Out of Profile DSCP - Remarks packet's DSCP values exceeding the defined CIR value. - None -Forwards packets exceeding the defined CIR value. STEP 3 Add a QoS policy profile. STEP 4 Click Apply. The QoS policy profile is added, and the device is updated. Modifying the QoS Policy Profile STEP 1 Click Quality of Service > Advanced Mode > QoS Policy Profile. The Policy Table Page opens. STEP 2 Click the Edit button. The Edit QoS Policy Profile Page opens: Cisco Small Business SFE/SGE Managed Switches Administration Guide 295