Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 174
Configuring VLANs, Add VLAN Range Dynamic, Static, Default, Enabled, Disabled
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
Configuring VLANs Defining VLAN Properties 6 • Type - Displays the VLAN type. The possible field values are: - Dynamic - Indicates the VLAN was dynamically created through GVRP. - Static - Indicates the VLAN is user-defined. - Default - Indicates the VLAN is the default VLAN. • Authentication - Indicates whether unauthorized users can access a VLAN. The possible field values are: - Enabled - Disables unauthorized users to use the VLAN. - Disabled - Enables unauthorized users from using the VLAN. STEP 2 Click the Add button. The Add VLAN Range Page opens: Add VLAN Range Page The Add VLAN Range Page allows network administrators to define and configure new VLANs, and contains the following fields: • VLAN - Specifies that a specific VLAN is to be defined. The possible field values are: - VLAN ID - Defines the VLAN ID. - VLAN Name - Defines a VLAN name. • Range - Specifies that a range of VLAN IDs is to be defined. The possible field values are: - VLAN Range - Defines the lower and upper bounds of the VLAN range. STEP 3 Define the relevant fields. Cisco Small Business SFE/SGE Managed Switches Administration Guide 165