Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 350
Copper Ports Test Result
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 350 highlights
Managing Device Diagnostics Viewing Integrated Cable Tests 15 STEP 1 Click Admin > Diagnostics > Copper Ports. The Copper Ports Page opens: Copper Ports Page The Copper Ports Page contains the following fields: • Unit Number - Indicates the unit number on which the tests are performed. • Port - Displays the port list. • Test Result - Displays the cable test results. Possible values are: - No Cable - Indicates that a cable is not connected to the port. - Open Cable - Indicates that a cable is connected on only one side. - Short Cable - Indicates that a short has occurred in the cable. - OK - Indicates that the cable passed the test. • Cable Fault Distance - Indicates the distance from the port where the cable error occurred.Last Update - Indicates the last time the cable tests were updated. Cable Length - Indicates the cable length. This test can only be performed when the port is up and operating at 1 Gbps. STEP 2 Click the Test button to run the cable test. The results of the test appear. Cisco Small Business SFE/SGE Managed Switches Administration Guide 341