Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 95
ForceUnauthorized, Checked, VLAN List, 1x Only, MAC Only, 1x & MAC, Enable Guest VLAN
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Configuring Device Security Defining 802.1X 4 - ForceUnauthorized - Denies the selected interface system access by moving the interface into unauthorized state. The device cannot provide authentication services to the client through the interface. • Enable Guest VLAN - Specifies whether the Guest VLAN is enabled on the device. The possible field values are: - Checked - Enables using a Guest VLAN for unauthorized ports. If a Guest VLAN is enabled, the unauthorized port automatically joins the VLAN selected in the VLAN List field. - Unchecked - Disables port-based authentication on the device. This is the default. • Authentication Method - Defines the user authentication method. The possible field values are: - 802.1x Only - Enables only 802.1x authentication on the device. - MAC Only - If enabled, causes the port to transition to the authorized or unauthorized state based on the supplicant's MAC address. - 802.1x & MAC - Enables 802.1x + MAC Authentication on the device. In the case of 802.1x + MAC, 802.1x takes precedence. • Enable Periodic Reauthentication - Permits port reauthentication during the specified Reauthentication Period (see below). The possible field values are: - Checked - Enables immediate port reauthentication. This is the default value. - Unchecked - Disables port reauthentication. • Reauthentication Period - Specifies the number of seconds in which the selected port is reauthenticated (Range: 300-4294967295). The field default is 3600 seconds. • Reauthenticate Now - Specifies that authentication is applied on the device when the Apply button is pressed. - Checked - Enables immediate port reauthentication. - Unchecked - Port authentication according to the Reauthentication settings above. • Authenticator State - Specifies the port authorization state. The possible field values are as follows: Cisco Small Business SFE/SGE Managed Switches Administration Guide 86