Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 115
Modifying IP Based ACL, Configuring Device Security, Edit IP Based ACL
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Configuring Device Security Defining Access Control 4 STEP 3 Define the relevant fields, STEP 4 Click Apply. The IP Based ACL is defined, and the device is updated. Modifying IP Based ACL STEP 1 Click Security Suite >Access Control > IP Based ACL. The IP Based ACL Page opens. STEP 2 Click the Edit button. The Edit IP Based ACL Pageopens: Edit IP Based ACL Page The Edit IP Based ACL Page contains the following fields: • ACL Name - Displays the user-defined IPv6 based ACLs. • New Rule Priority - Indicates the rule priority, which determines which rule is matched to a packet on a first-match basis. • Protocol - Creates an ACE based on a specific protocol. For a list of available protocols, see the Protocol field description in the IPv6 Based ACL Page above. • Source Port - Defines the TCP/UDP source port to which the ACE is matched. This field is active only if 800/6-TCP or 800/17-UDP are selected in the Select from List drop-down menu. The possible field range is 0 - 65535. Cisco Small Business SFE/SGE Managed Switches Administration Guide 106