Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 201
Configuring IP Information, IPv6 Interface Interface, The address must be a valid IPv6 address
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 201 highlights
Configuring IP Information IP Addressing 7 STEP 1 Click System > System Management > IP Addressing > IPv6 Configuration > IPv6 Interface . The IPv6 Interface Page opens: IPv6 Interface Page The IPv6 Interface Page contains the following fields: • Interface - Indicates the Link Local Interface. The possible field values are: - VLAN - Indicates VLAN is the Link Local interface. - ISATAP Tunnel - Indicates a ISATAP tunnel is a Link Local interface. • IPv6 Type - Displays the IPv6 Type. The possible field values are: - Link-Local - Indicates the IPv6 address is link-local. - Global Unicast - Indicates the IPv6 address is global Unicast. • IPv6 Address - Indicates the IPv6 address assigned to the interface. Up to five IP addresses can be set per interface, with the limitation that up to 128 addresses can be set per system. The address must be a valid IPv6 address, specified in hexadecimal using 16-bit values between colons. • Prefix - Indicates the length of the IPv6 prefix. The length is a decimal value that indicates how many of the high-order contiguous bits of the address comprise the prefix (the network portion of the address). The possible field values are 5-128. • DAD Status - Displays the current DAD status. The possible field values are: Cisco Small Business SFE/SGE Managed Switches Administration Guide 192