Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 298
Configuring Quality of Service, Add QoS Class Map
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 298 highlights
Configuring Quality of Service Defining Advanced QoS Mode STEP 2 Click the Add button. The Add QoS Class Map Page opens: Add QoS Class Map Page 11 The Add QoS Class Map Page contains the following fields. • Class Map Name - Defines a new Class Map name • IP ACL - Matches packets to IP based ACLs first, then matches packets to MAC based ACLs. Select either an IPv4 ACL or an IPv6 ACL. • Match - Criteria used to match IP addresses and /or MAC addresses with an ACL's address.The possible field values are: - And - Both the MAC-based and the IP-based ACL must match a packet. - Or - Either the MAC-based or the IP-based ACL must match a packet. • MAC ACL - Matches packets to MAC based ACLs first, then matches packets to IP based ACLs. • Preferred ACL - Defines if packets are first matched to an IP based ACL or a MAC based ACL. The possible field values are: - IP Based ACLs - Matches packets to IP based ACLs first, then matches packets to MAC based ACLs. - MAC Based ACLs - Matches packets to MAC based ACLs first, then matches packets to IP based ACLs. STEP 3 Define the relevant fields. STEP 4 Click Apply. The device is updated. Cisco Small Business SFE/SGE Managed Switches Administration Guide 289