Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 227
ARP, Support IP Format
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 227 highlights
Configuring IP Information IP Addressing 7 - Disable - Disables DHCP Option 82 with data insertion on the device. This is the default value. • DHCP Server - Defines the address of the remote DHCP server to track across the VLANs. STEP 2 Click the Add button. The Add DHCP Server Page opens: Add DHCP Server Page The Add DHCP Server Page contains the following field: • Support IP Format - Provides the supported IP format: Version 6 or Version 4. • DHCP Server IP Address - Defines the DHCP server IP address. STEP 3 Specify the IP address of the server. STEP 4 Click Apply. DHCP is enabled , and the device is updated. ARP The Address Resolution Protocol (ARP) is the method for finding a host's Link Layer (MAC) address when only its Internet Layer (IP) address is known. The ARP table is used to maintain a correlation between each MAC address and its corresponding IP address. The ARP table can be filled in statically by the user. When a static ARP entry is defined, a permanent entry is put in the table, which the system uses to translate IP addresses to MAC addresses. To define ARP: Cisco Small Business SFE/SGE Managed Switches Administration Guide 218