Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 262
Configuring Spanning Tree, Interface Settings Enable, Disable
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
Configuring Spanning Tree Defining Spanning Tree 10 STEP 1 Click Bridging > Spanning Tree > Interface Settings. The STP Interface Settings Page opens: Interface Settings Page The STP Interface Settings Page contains the following fields: • Copy From Entry Number - Indicates the port from which the STP interface setting are copied. • To Entry Numbers - Indicates the port to which the STP interface setting are copied. • Ports - Display the STP Interface settings of the specified stacking member's ports. • LAGs - Display the STP Interface settings of device LAGs. • Port - Indicates the port or LAG on which STP is enabled. • STP - Indicates if STP is enabled on the port. The possible field values are: - Enable - Indicates that STP is enabled on the port. - Disable - Indicates that STP is disabled on the port. • Port Fast - Indicates if Fast Link is enabled on the port. If Fast Link mode is enabled for a port, the Port State is automatically placed in the Forwarding state when the port link is up. Fast Link optimizes the STP protocol Cisco Small Business SFE/SGE Managed Switches Administration Guide 253