Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 162

Configuring Ports Configuring Ports Settings for Layer 2 Enabled Devices 5 - Down - Port is disconnected. • Port Speed - Displays the current port speed. • Duplex Mode - Displays the port duplex mode. This field is configurable only when auto negotiation is disabled, and the port speed is set to 10M or 100M. This field cannot be configured on LAGs. The possible field values are: - Full - Indicates that the interface supports transmission between the device and the client in both directions simultaneously. - Half - Indicates that the interface supports transmission between the device and the client in only one direction at a time. • PVE - Indicates that this port is protected by an uplink, so that the forwarding decisions are overwritten by those of the port that protects it. PVE is supported in Layer 2 mode. • LAG - Defines if the port is part of a Link Aggregation Group (LAG). STEP 2 To copy the settings from one interface to another, enter the specific interface numbers in the Copy From Entry Number and To Entry Number(s) fields. STEP 3 Define the Unit number. STEP 4 Click Apply. The Port Settings are defined, and the device is updated. Modifying Port Settings STEP 1 Click Bridging > Port Management > Port Settings. The Port Settings Page opens: STEP 2 Define the Unit number. STEP 3 Click a specific entry's Edit button. The Edit Port Page opens: Cisco Small Business SFE/SGE Managed Switches Administration Guide 153