Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 188
Customer, SGE devices, Admit All, Admit Tag Only, Enable, Disable
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
Configuring VLANs Defining VLAN Interface Settings 6 - Customer - The port can be member of one or more double tagged Multicast TV VLAN. Refer to "Define Customer VLAN using Q-in-Q" for details. • PVID - Assigns a VLAN ID to untagged packets. The possible values for General, Access, and Trunk Interface VLAN Mode are: - SGE devices - 1-4094 and 4095 - SFE devices - 1-4093 and 4095 Packets classified to the Discard VLAN are dropped. • Frame Type - Packet type accepted on the port. Possible values are: - Admit All - Indicates that both tagged and untagged packets are accepted on the port. - Admit Tag Only - Indicates that only tagged packets are accepted on the port. • Ingress Filtering - Ingress filtering discards packets which do not include an ingress port. The possible values are: - Enable - Ingress filtering is activated on the port. - Disable - Ingress filtering is not activated on the port. • Multicast TV VLAN - Indicates if a Multicast TV VLAN is enabled on the device. Multicast TV VLANs enable VLANs to receive Multicast TV transmissions from ports that are not Access ports. The possible values are: - Enable - Multicast TV VLAN is activated on the port. - Disable - Multicast TV VLAN is not activated on the port. STEP 3 Define the relevant fields. STEP 4 Click Apply. The VLAN Interface settings are modified, and the device is updated. Cisco Small Business SFE/SGE Managed Switches Administration Guide 179