Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 329

Configuring SNMP Defining Trap Management 12 • Enable SNMP Notification - Specifies whether the device can send SNMP notifications. The possible field values are: - Checked - Enables SNMP notifications. - Unchecked - Disables SNMP notifications. • Enable Authentication Notification - Specifies whether SNMP authentication failure notification is enabled on the device. The possible field values are: - Checked - Enables the device to send authentication failure notifications. - Unchecked - Disables the device from sending authentication failure notifications. STEP 2 Define the relevant fields. STEP 3 Click Apply. The SNMP Trap settings are defined, and the device is updated. Configuring Station Management The Station Management Page contains information for defining filters that determine whether traps are sent to specific users, and the trap type sent. SNMP notification filters provide the following services: • Identifying Management Trap Targets • Trap Filtering • Selecting Trap Generation Parameters • Providing Access Control Checks Traps indicating status changes are issued by the switch to specified trap managers. Specify the trap managers so that key events are reported by this switch to the management station. Specify up to eight management stations that receive authentication failure messages and other trap messages from the switch. Cisco Small Business SFE/SGE Managed Switches Administration Guide 320