Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 246
Modifying IGMP Snooping, Configuring Multicast Forwarding, Edit IGMP Snooping
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 246 highlights
Configuring Multicast Forwarding IGMP Snooping 9 • Leave Timeout - Indicates the amount of time the host waits, after requesting to leave the IGMP group and not receiving a Join message from another station, before timing out. If a Leave Timeout occurs, the switch notifies the Multicast device to stop sending traffic The Leave Timeout value is either user-defined, or an Immediate Leave value. The default timeout is 10 seconds. STEP 2 Define the relevant fields. STEP 3 Click Apply. The IGMP Snooping Parameters are updated, and the device is updated. Modifying IGMP Snooping STEP 1 Click Bridging > Multicast > IGMP Snooping. The IGMP Snooping Page opens: STEP 2 Click the Edit button. The Edit IGMP Snooping Page: Edit IGMP Snooping Page The Edit IGMP Snooping Page contains the following fields: • VLAN ID - Specifies the VLAN ID. • IGMP Status Enable - Indicates if IGMP snooping is enabled on the VLAN. The possible field values are: - Enable - Enables IGMP Snooping on the VLAN. - Disable - Disables IGMP Snooping on the VLAN. Cisco Small Business SFE/SGE Managed Switches Administration Guide 237