Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 183
Modifying GVRP Settings, Enabled, Disabled, GVRP Settings Edit GVRP
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
Configuring VLANs Defining GVRP Settings 6 • Copy From Entry Number - Copies GVRP parameters from the specified table entry. • To Entry Number(s) - Assigns the copied GVRP parameters to the specified table entry. • Ports of Unit - Indicates the port number and stacking member for which GVRP parameters are displayed. • LAGs - Indicates the LAG number for which GVRP parameters are displayed. • Interface - Interface described by the GVRP settings entry. • GVRP State - Indicates if GVRP is enabled on the interface. The possible field values are: - Enabled - Enables GVRP on the selected interface. - Disabled - Disables GVRP on the selected interface. • Dynamic VLAN Creation - Indicates if Dynamic VLAN creation is enabled on the interface. The possible field values are: - Enabled - Enables Dynamic VLAN creation on the interface. - Disabled - Disables Dynamic VLAN creation on the interface. • GVRP Registration - Indicates if VLAN registration through GVRP is enabled on the device. The possible field values are: - Enabled - Enables GVRP registration on the device. - Disabled - Disables GVRP registration on the device. STEP 2 Define the relevant fields. STEP 3 Click Apply. The GVRP Settings are defined, and the device is updated. Modifying GVRP Settings STEP 1 Click Bridging > VLAN Management > GVRP Settings. The GVRP Settings Page opens: STEP 2 Click the Edit button. The Edit GVRP Page opens: Cisco Small Business SFE/SGE Managed Switches Administration Guide 174