Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 270
Modifying RTSP, Configuring Spanning Tree, Edit Rapid Spanning Tree
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 270 highlights
Configuring Spanning Tree Defining Spanning Tree 10 • Activate Protocol Migration - Click the Activate button to run a Protocol Migration Test. The test identifies the STP mode of the interface connected to the selected interface. STEP 2 Define the relevant fields. STEP 3 Click Apply. The Rapid Spanning Tree Settings are defined, and the device is updated. Modifying RTSP STEP 1 Click Bridging > Spanning Tree > RSTP. The RSTP Page opens: STEP 2 Click the Edit button. The Edit Rapid Spanning Tree Page opens: Edit Rapid Spanning Tree Page The Edit Rapid Spanning Tree Page contains the following fields: • Interface - Specifies whether Rapid STP is enabled on a port or LAG. • Role - Indicates the port role assigned by the STP algorithm in order to provide to STP paths. The possible field values are: - Root - Provides the lowest cost path to forward packets to root switch. - Designated - Indicates that the port or LAG via which the designated switch is attached to the LAN. - Alternate - Provides an alternate path to the root switch from the root interface. Cisco Small Business SFE/SGE Managed Switches Administration Guide 261