Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 406
Edit LAG Copy From Entry Number, To Entry Numbers, Description, Status, Speed, Auto Negotiation
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 406 highlights
Aggregating Ports Defining LAG Settings 18 • Copy From Entry Number - Copies the LAG configuration from the specified table entry. • To Entry Number(s) - Assigns the copied LAG configuration to the specified table entry. • LAG - Displays the LAG ID number. • Description - Displays the user-defined port name. • Type - Displays the port types that comprise the LAG. • Status - Indicates if the LAG is currently operating. • Speed - Displays the configured speed at which the LAG is operating. • Auto Negotiation - Displays the current Auto Negotiation setting. Auto Negotiation is a protocol between two link partners that enables a port to advertise its transmission rate, and flow control abilities to its partner. • Flow Control - Displays the current Flow Control setting. Flow control may be enabled, disabled, or be in auto negotiation mode. Flow control operates when the ports are in full duplex mode. • PVE - Indicates that this LAG's ports are protected by an uplink, so that the forwarding decisions are overwritten by those of the ports that protect them. PVE is supported in Layer 2 mode. STEP 2 Click the Edit button. The Edit LAG Page opens: Cisco Small Business SFE/SGE Managed Switches Administration Guide 397