Linksys SGE2000 Cisco Small Business SFE/SGE2xxx Series Managed Switches Admin - Page 347
Managing Power-over-Ethernet Devices, Edit PoE Settings Checked, Critical
UPC - 745883572120
View all Linksys SGE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 347 highlights
Managing Power-over-Ethernet Devices Defining PoE Settings Edit PoE Settings Page 14 The Edit PoE Settings Page contains the following fields: • Port - Indicates the specific interface for which PoE parameters are defined, and assigned to the powered interface connected to the selected port. • Enable PoE - Enables or disables PoE on the port. The possible values are: - Checked - Enables PoE on the port. This is the default setting. - Unchecked - Disables PoE on the port. • Power Priority Level - Determines the port priority if the power supply is low. The port power priority is used if the power supply is low. The field default is low. For example, if the power supply is running at 99% usage, and port 1 is prioritized as high, but port 3 is prioritized as low, port 1 is prioritized to receive power, and port 3 may be denied power. The possible field values are: - Low - Defines the PoE priority level as low. - High - Defines the PoE priority level as high. - Critical - Defines the PoE priority level as Critical. This is the highest PoE priority level. • Power Allocation - Indicates the power in milliwatts allocated to the port. The range is 0 -15,400. Cisco Small Business SFE/SGE Managed Switches Administration Guide 338