Oki ML591 Users' Guide for the OkiLAN 6010e

Oki ML591 Manual

Get Oki ML591 PDF manuals and user guides View all Oki ML591 manuals
Add to My Manuals
Save this manual to your list of manuals

Oki ML591 manual content summary:

  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 1
    OkiLAN 6010e® Pocket Print Server User's Guide High Performance Ethernet Network Print Server
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 2
    . ©1998 by Okidata. All rights reserved. Okidata, OKIPAGE, OkiVIEW, OkiLAN Reg. T.M., M.D.,., OKI Electric Industry Co., Ltd., Windows, MS-DOS Reg. T.M., Microsoft Corp.; HP LaserJet, PCL, Reg. T.M. Hewlett Packard Company; Centronics Reg. T.M., Centronics Data Computer Corp.; Energy Star
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 3
    I: Hardware Installation Section II: Advanced Mangement Features Chapter 1: SNMP II-5 Chapter 2: HP JetAdmin Support II-9 Chapter 3: HP Web JetAdmin Support II-12 Chapter 4: OkiLAN 6010e Web Configuration II-15 Chapter 5: Additional Management Features II-26 OKI OkiLAN 6010e User's Guide iii
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 4
    4: OkiNet for TCP/IP IV-28 Chapter 5: Telnet Configuration IV-53 Appendix A: Troubleshooting IV-61 Appendix B: Application Considerations IV-70 Section V: Windows Printing Chapter 1: OkiLAN Chapter 3: OkiLAN 6010e Set Up for Windows 95 ........ V-20 Index iv OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 5
    NetWare versions 3.x, 4.1 and higher. TCP/IP and Windows NT TCP/IP, FTP and Remote LPD protocols. Simple Network Management Protocol (SNMP) and Windows NT are supported in this environment. OKI OkiLAN 6010e User's Guide v
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 6
    Technical Support Service Information This information is valid for the United States and Canada only. OKIDATA Online Visit the OKIDATA Web Site at http://www.okidata.com for the latest information on: • Software drivers • Product guides • Customer support • Corporate information • Dealers •
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 7
    24 hours a day, 7 days a week at 1-800-OKIDATA (800-654-3282). Please be sure that you are calling from a telephone close to your printer, so you can describe your problem accurately. Our customer service representatives (CSRs) are trained on all current Oki products. They can answer your questions
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 8
    to ship your OkiLAN 6010e to a service center, replace it in the original packing materials. Before shipping your print server, call for a return authorization number (RA). UNITED STATES and CANADA OKIDATA Tel: 1-800-OKIDATA (800-654-3282) Fax: 1-609-222-5247 viii OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 9
    MEXICO Oki Data de Mexico, S.A. de C.V. Tel: 525-661-6860 Fax: 525-661-5861 Technical Support ARGENTINA Megatech Tel: (541)-371-4123 Fax: (541)-371- (571) 218-2380 Fax: (571) 622-1280 BRAZIL Oki Data do Brasil, Ltda. Tel: (5511) 5589-1518 Fax: (5511) 5584-0267 OKI OkiLAN 6010e User's Guide ix
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 10
    When you call Customer Support Center, the following information will help us answer your questions more quickly and accurately. Please be able to identify write these numbers down in the space provided below for future reference. S/N: Ethernet ADDR: 00:40:68 x OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 11
    Hardware Installation Section I: Hardware Installation
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 12
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 13
    Hardware Installation Section I - Hardware Installation In This Section Powering On the OkiLAN 6010e I-7 Printing a Configuration Sheet I-8 OKI OkiLAN 6010e User's Guide I - 3
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 14
    Section I - Hardware Installation I - 4 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 15
    : • OkiLAN 6010e hardware • Power adapter with line cord • Installation User's Guide • Utilities CD • Product registration card Installing the OkiLAN 6010e 1. Turn off printer power. 2. Attach the OkiLAN 6010e to the centronics connec- tor on your printer. Parallel connector OKI OkiLAN 6010e User
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 16
    Section I - Hardware Installation 3. Secure the OkiLAN 6010e with the wire clips on the printer's connector. 4. Plug the power adapter wire into the power jack on the OkiLAN 6010e. Then plug the power adapter into a wall outlet. I - 6 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 17
    the receptacle on the back of the OkiLAN 6010e. Attach the other end of the cable to the Network. Powering On the OkiLAN 6010e Turn printer power on. The status indicator on the OkiLAN 6010e will blink orange during self-test. When self-test completes successfully, the status indicator will change
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 18
    : If Status Indicator does not display as indicated above, see Hardware Troubleshooting at the end of this section. Printing a Configuration Sheet To print utility program. The selected language must match the printer's configured language to print correctly. The content of the configuration sheet will
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 19
    Connect for IPX/SPX (Windows 95/98) OkiNet Connect for IPX/SPX Windows NT) OkiNet Connect DLC (Windows 95/98) OkiNet Connect DLC (Windows NT) OKI OkiLAN 6010e User's Guide I - 9
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 20
    and Apple EtherTalk are supported by other OKI print servers but not by the OkiLAN 6010e. Hardware Troubleshooting Status Indicator The LED list describes LED displays that indicate problems, as well as possible solutions: LED Display Flashing green very rapidly Problem The OkiLAN 6010e has not
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 21
    and has sufficient paper and toner. LED Display LED is solid orange for more than 30 seconds Problem The printer server has failed the Power On Self Test. Solution The OkiLAN 6010e will try to print a configuration sheet on the printer with more information. OKI OkiLAN 6010e User's Guide I - 11
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 22
    from the printer and unplug the power adapter. Reconnect the OkiLAN 6010e and the power adapter. If the OkiLAN 6010e still fails the self test, continue below. b) The OkiLAN 6010e power supply has failed or there is a hardware problem. Contact Okidata Customer Support for replacement information
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 23
    Advanced Management Section II: Advanced Management Features
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 24
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 25
    Windows NT Printer for the OkiLAN 6010e II-13 Obtaining Diagnostic Information from the OkiLAN 6010e II-14 Chapter 4: OkiLAN 6010e Web Configuration II-15 Overview II-15 Connecting to the OkiLAN 6010e II-16 Configuration II-18 Status II-21 Support II-21 OKI OkiLAN 6010e User's Guide II - 3
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 26
    Management Features II-26 OkiNet Alert II-26 Enhanced Printer Status II-26 OkiNet for NDS II-27 OkiNet for TCP/IP (Creating Custom Views II-27 NetWare Load Balancing II-27 Windows Printing II-28 Printer Security for TCP/IP Printing ......... II-28 II - 4 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 27
    fully functional SNMP agent and supports any standard SNMP management platform, printer ports, network interface printer settings, and the overall OkiLAN 6010e status. Printer status traps such as on-line, off-line, detached printer and printer error are also provided. OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 28
    reset. An authentication failure trap is sent when the OkiLAN 6010e receives an SNMP trap GET or SET request with an incorrect community name. II - 6 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 29
    over both UDP and IPX. Additionally, the OkiLAN 6010e can send traps on toner low, paper jam, and printer cover open. The traps may be configured for specific destination addresses and can be discards the message and sends an authentication failure trap. OKI OkiLAN 6010e User's Guide II - 7
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 30
    Section II - Advanced Management Features Both the OkiNet for TCP/IP and the IPX, and the OkiLAN 6010e Configuration utility (telnet) allow you to specify the community names and a trap destination IP address. II - 8 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 31
    Section II - Advanced Management Features Chapter 2: HP JetAdmin Support Overview This section contains instructions and information on how to configure and obtain diagnostic information from print server operating mode from the given options on the right. OKI OkiLAN 6010e User's Guide II - 9
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 32
    Select the desired queues from the list of Available Queues to be added into service. Click the Service button to move the selection to the Serviced Queues column. When all queues have been added, click OK. 8. Click and set the print server IP configuration. II - 10 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 33
    information. Note: For JetAdmin to function correctly with the OkiLAN 6010e, the SNMP Get community name in JetAdmin must be set to public. Advanced Management OKI OkiLAN 6010e User's Guide II - 11
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 34
    Section II - Advanced Management Features Chapter 3: HP Web JetAdmin Support Overview This section contains instructions and information on how to configure, install, and obtain diagnostic changes to the options listed and click the corresponding Apply button. II - 12 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 35
    a printer driver from the pull-down menu and click the Continue button. 7. On the Install Printer Page 4 page, enter a name for the printer in the Select Printer Name field and click the Install Printer button. 8. Users in the domain can now print to the new printer. OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 36
    wish to view diagnostic information. 2. Click the Diagnose button. 3. From the Properties page, select the appro- priate diagnostic category name to view information. II - 14 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 37
    Features Chapter 4: OkiLAN 6010e Web Configuration Overview This section contains instructions and information on how to configure and manage your OkiLAN 6010e using If you experience difficulties connecting to the server, refer to Appendix A, Troubleshooting. OKI OkiLAN 6010e User's Guide II - 15
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 38
    all available OkiLAN 6010e products and their addresses, refer to the OkiLAN 6010e Product Discovery section for instructions. Note: As a layer of security, the TCP port number that the device uses to communicate the Web Admin Configuration section for details. II - 16 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 39
    to the pages under each menu. The right pane displays the currently selected page. If your browser does not support frames, or you select the No Frames link at the bottom of the left pane, a single page the menu links that appear at the bottom of the page. OKI OkiLAN 6010e User's Guide II - 17
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 40
    /IP for instructions on configuration. 4. Select the Submit Changes button at the bottom of the page to send the new values to the print server. WARNING: Changes will not be saved if the Submit Changes button is not selected before continuing to another page. II - 18 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 41
    Request Results page will list all fields that contain errors along with a description of the problem. Selecting the Back button on your browser will generally redisplay the page you just submitted and configuration pages reminding you to reset the server. OKI OkiLAN 6010e User's Guide II - 19
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 42
    . The default HTTP port is 80, but can be changed to provide added security. • FAQ URL - By default points to the FAQ page on the OKI Web Server. Maximum URL length is 63 characters. • Updates URL - By default points to the firmware update site on the
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 43
    of all printers currently attached. Okidata Customer Support. FAQ By default this link will connect you to the FAQ page on the Okidata Web Server. This link can be configured to point to other locations by selecting the Admin(Web) link under the Configuration menu. OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 44
    Features Updates By default this link will connect you to the firmware update location on the Okidata FTP Server. This link can be configured to point to other locations by selecting the Admin simultaneously by selecting the Restore All Protocols button. II - 22 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 45
    view, if desired, to control which devices are displayed. See Creating Customized Views in the OkiLAN 6010e Users Guide, Section IV. 3. Select Save View to HTML under the File menu. 4. Enter a name and save must be run again to obtain current information. OKI OkiLAN 6010e User's Guide II - 23
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 46
    II - Advanced Management Features Troubleshooting Server Connection • The print server only supports two simultaneous HTTP connections. If a hung connection. This will use up one of the HTTP connections, can cause problems connecting to the server and will slow down Web response time. If TCP timeout
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 47
    print server information, it is a good idea to select the Reload or Refresh buttons on your browser instead of using the Back button. Advanced Management OKI OkiLAN 6010e User's Guide II - 25
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 48
    OKI OkiNet Alert enterprise management utility allows administrators to proactively manage printers by being immediately alerted to printing problems : HP OpenView or the OKI OkiNet Alert utility. For bidirectional capable printers the OkiLAN 6010e can retrieve the printer information, such as front
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 49
    allows administrators to create and manage OKI print server objects in the NDS more information, see OkiNet for NDS under NetWare in this manual. OkiNet for TCP/IP (Creating Custom Views) OkiNet for under the TCP/ IP section of this manual. NetWare Load Balancing Using this feature, administrators
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 50
    TCP/IP Printing The OkiLAN 6010e print server has a Printer Security for TCP/IP Printing feature which allows the printers to only be accessed from a specified list of IP addresses. This feature is accessed via TELNET option #9, TCP Connection Configuration. II - 28 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 51
    Section III: NetWare NetWare
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 52
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 53
    Information III-21 Printing a Configuration Sheet III-21 Resetting the OkiLAN 6010e III-21 Restoring Factory Default Settings .......... III-22 Creating Customized Views III-23 OKI OkiLAN 6010e User's Guide III - 3
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 54
    ... III-35 Printing with an OkiLAN 6010e Print Server III-36 Configuring the OkiLAN 6010e Using OkiNet for NDS III-38 Adding or Removing the OKI Print Server Class III-39 III - 4 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 55
    numbers on the OkiLAN 6010e enclosure. • Install the OkiLAN 6010e hardware and connect the cabling-see Section I. Instructions for hardware installation are found in Section I of this manual. • Install the OkiNet Utility for NetWare-see Section I. NetWare OKI OkiLAN 6010e User's Guide III - 5
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 56
    6010e supports both PServer and NPrinter mode. There are several factors to consider when choosing which mode to use. In PServer mode, the OkiLAN 6010e operates as the print server. It services specified steps to set up, but works well with existing utilities. III - 6 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 57
    utilities. Security Without supervisor intervention, other printers cannot access Data can be data sent to the password protected queues. Data from the file server can be to the printer. password protected from the file server to the printer. OKI OkiLAN 6010e User's Guide III - 7
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 58
    using the OkiNet for NetWare utility. Note: OkiNet for NetWare contains minimal NDS configuration support. For more extensive configuration options, use the OkiNet for NDS utility described in Chapter . The main OkiNet for NetWare screen will display. III - 8 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 59
    Configuration from the Print Server menu or select the Configuration icon on the toolbar. 3. Set the appropriate configuration by choosing the applicable file folder tabs. OKI OkiLAN 6010e User's Guide III - 9
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 60
    • SNMP Traps NetWare Configuration Options To configure options specific to the NetWare protocol, select the NetWare file tab. The following screen will display: III - 10 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 61
    . Then, create one NDS printer object per output port. For example, Printer 1 goes to Port 1, Printer 2 goes to port 2. Attach NDS print queues to the NDS printer objects. Once you have created name of the NDS print server object that was created. OKI OkiLAN 6010e User's Guide III - 11 NetWare
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 62
    NetWare Queues option allows you to add bindery print queues to be serviced by first selecting each desired queue and then selecting the § Load Balancing Print jobs can be distributed to multiple printers on selected queues by selecting the same queue multiple times OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 63
    the OkiLAN 6010e output port, select the Output Port file tab. The following screen will display: Port Number Select the port you wish to configure. OKI OkiLAN 6010e User's Guide III - 13 NetWare
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 64
    The Printer Type selection is used to determine the actual characters required to switch the language of the printer. • OFF - Print data stream will job to switch the printer to the appropriate printer language. Note: If you are not switching languages or the printer can switch languages
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 65
    to OFF for all ports of your OkiLAN 6010e. If a configuration sheet cannot be printed, troubleshooting abilities are limited. Bidirectional Printer Status Support Enable this option for enhanced status from bidirectional printers that support PJL. OKI OkiLAN 6010e User's Guide III - 15 NetWare
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 66
    will display: Note: SNMP options need to be configured only if you are managing OkiLAN 6010e products or getting system information using SNMP. III - 16 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 67
    in your SNMP-based management program. System Contact Enter any information useful to a user if problems with the OkiLAN 6010e arise. System Location Enter a description of the OkiLAN 6010e location. the community name from the default setting. NetWare OKI OkiLAN 6010e User's Guide III - 17
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 68
    by the OKI OkiNet Alert and other monitoring utilities for grouping or filtering OkiLAN 6010e devices. OkiNet Alert assists in managing network printers by immediately alerting you of printer problems. SNMP Traps file tab. The following screen will display: III - 18 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 69
    hosts on the local subnet, enter 255.255.255.255. Ports to Trap Select the output ports on which you wish traps to be active. OKI OkiLAN 6010e User's Guide III - 19 NetWare
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 70
    printer conditions may cause a printer trap to occur: • On-line • Off-line • No Printer Attached • Paper Out • Toner Low • Paper Jam • Door Open • Printer Error Note: Toner Low, Paper Jam and Door Open require the printer traffic, disable unused protocols. III - 20 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 71
    information is available for the following topics: • Printer • Print Server • Protocols • Network • Statistics • Technical Support • System Printing a Configuration Sheet The configuration while a job is printing, the job may not print successfully. OKI OkiLAN 6010e User's Guide III - 21 NetWare
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 72
    jobs when you select Restore Factory Defaults. If you reset the OkiLAN 6010e while a job is printing, the job may not print successfully. III - 22 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 73
    OkiLAN 6010e products which cannot be found in the list, select the Search Network by Address option. For more information about this option, select HELP. OKI OkiLAN 6010e User's Guide III - 23 NetWare
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 74
    Select from the list of product types Status Select from the list of status conditions Default File Server The default NetWare file server III - 24 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 75
    the column by which you wish to sort. A sort order can only be defined on columns displayed on the main OkiNet for NetWare screen. NetWare OKI OkiLAN 6010e User's Guide III - 25
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 76
    issue, you may wish to set the refresh rate to 10. This would update the screen every ten minutes and minimize network traffic. III - 26 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 77
    OkiLAN 6010e products selected. Set Community Name Enter the Set Community Name necessary to access the OkiLAN 6010e or group of OkiLAN 6010e products selected. OKI OkiLAN 6010e User's Guide III - 27 NetWare
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 78
    1500001. To add a whole network, enter D4-. Delete The Delete button deletes an OkiLAN 6010e access entry in the Serial/Network Number list. III - 28 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 79
    can manage OKI devices with the same utility used to manage other network objects such as printers and queues. The OkiLAN 6010e supports NetWare NDS versions of Windows operating systems to service, you can install OkiNet for NDS for each. OkiNet for NDS supports four different versions of NWAdmin.
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 80
    OkiNet for NDS for Novell NetWare 4.11 and Windows 3.x See Installing OkiNet for NDS for Novell NetWare 4.11 and Windows 95/ Windows NT III - 30 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 81
    Novell NetWare 4.1 A single installation is required to service Windows 3.x and Windows 95 operating systems with provided. Select the option to install OkiNet for NDS. Follow the instructions on the screen. When installing OkiNet for NDS, the install OKI OkiLAN 6010e User's Guide III - 31 NetWare
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 82
    OkiNet for NDS, the install utility copies the OkiNet for NDS files to the destination directory, adds the OKI print server class to the NDS schema and modifies the user's NWADMIN3X.INI file. 3. Once OkiNet : [Snapin Object DLLs Win3x] XVWNDS16.DLL=XVWNDS16.DLL III - 32 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 83
    for NDS, the install utility copies the OkiNet for NDS files to the destination directory, adds the OKI print server class to the NDS schema and modifies the user's NWADMN3X.INI file. 3. Once OkiNet : [Snapin Object DLLs Win3x] XVWNDS16.DLL=XVWNDS16.DLL OKI OkiLAN 6010e User's Guide III - 33 NetWare
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 84
    for NDS, the install utility copies the OkiNet for NDS files to the destination directory, adds the OKI print server class to the NDS schema and modifies the user's registry. 3. Once OkiNet for NDS (path to NWAdmin)\ XVWNDS32.dll "Snapin Object DLLs WinNT" III - 34 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 85
    the Class of New Object list box, select OKI Print Server. If the OKI Print Server is not listed, check the following: • The OkiNet for has been installed. • The OKI Printing Device has not been removed from the schema. See Adding or Removing the OKI Print Server section for more information
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 86
    mismatch in the OKI device frame format may cause the device not OKI devices, select a device to assign to the object. 8. Enter a name for the new OKI Print Server object. 9. Select Create. The new OKI Instructions for hardware installation are found in Section I of this manual. 2. Create an OKI Print
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 87
    OKI print server icon in the NDS tree or by selecting Details from the File menu. 4. If your OkiLAN 6010e supports printer to which the queue will print. 6. Select Assign 7. Select or create a NetWare Printer object from the Printer . This will allow multiple printers to service a single print queue.
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 88
    14. Select or create a NetWare Print Queue object from the Printer/Queue Assignments dialog. 15. Select OK to save your printer and queue selections. 16. From the Assignments page, select OK the appropriate configuration by choosing the applicable detail pages. III - 38 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 89
    Device Class. The OKI print server class will no longer show up in the Create New Object dialog. If the Remove OKI Printing Device Class option is grayed, the class has already been removed. If the option does not exist, OkiNet for NDS is not installed. OKI OkiLAN 6010e User's Guide III - 39
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 90
    OKI OKI Print Server objects from the directory tree before uninstalling OkiNet for NDS. Adding the OKI Print Server Class The OKI . If the OKI print server class 's NetWare Administrator, choose Define OKI Printing Device Class. If this OKI print server class will now appear in the Create New Object dialog
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 91
    Section IV: TCP/IP TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 92
    In This Section Chapter 1: Introduction IV-6 Overview IV-6 Software Requirements IV-6 Network Preparation IV-7 Before You Start IV-7 Overview of TCP/IP Configuration IV-8 Chapter 2: Configuring the OkiLAN 6010e IV-9 Choosing an IP Address IV-9 Configuring the OkiLAN 6010e IV-10 Assigning
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 93
    a Telnet Session IV-52 Starting the BOOTP Server IV-52 Chapter 5: Telnet Configuration ...... IV-53 Overview IV-53 Running a Telnet Session IV-53 Showing Network/Printer Information (Option 1 IV-55 TCP/IP OKI OkiLAN 6010e User's Guide IV - 3
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 94
    Firmware (Option 8)....... IV-59 Restore to Factory Default Configuration (Option 9 IV-60 Appendix A: Troubleshooting .......... IV-61 Main Status Indicator IV-61 Restoring the OkiLAN 6010e to Factory Defaults IV- .07 for Printing with the OkiLAN 6010e IV-79 IV - 4 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 95
    2.x for Printing with the OkiLAN 6010e IV-100 Configuring Sun-OS v4.1.x or Ultrix v4.2 for Printing with the OkiLAN 6010e ...... IV-102 TCP/IP OKI OkiLAN 6010e User's Guide IV - 5
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 96
    instructed on how to set up your host computers to print to the OkiLAN 6010e using the TCP/IP protocol. OkiLAN 6010e supports three TCP/IP methods for printing: • Remote Line Printer a computer supporting the OkiNet for NetWare utility, OR telnet and one of the following: • Manual arp table entry
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 97
    and a hostname (alias) to the OkiLAN 6010e. • Use the network name service or the "/etc/ hosts" file to add the OkiLAN 6010e to the network. 6010e hardware and connect the cabling. Instructions for hardware installation are found in Section I of this manual. • Write down the serial number and
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 98
    Section IV - TCP/IP Overview of TCP/IP Configuration • Assign an IP address for the OkiLAN 6010e • Configure the OkiLAN 6010e network information • Configure hosts for printing to the OkiLAN 6010e • Test print (optional) IV - 8 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 99
    unique IP address. The IP address can be permanently stored using one of the following: • OKI OkiNet management utilities for TCP/ IP or Novell NetWare • OkiLAN 6010e Configuration utility via telnet. Note 6010e. Example: 192.168.42.50 OkiLAN 6010e_name TCP/IP OKI OkiLAN 6010e User's Guide IV - 9
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 100
    use the Network Information Service (NIS), Domain Name Service (DNS) or the "/ etc/hosts" database. See your network documentation for instructions. Configuring the OkiLAN 6010e Novell NetWare client. See Section III of this manual for specific information. IV - 10 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 101
    .42.24 00:02:16:00:00:01 temp Windows 95, Windows NT Example: arp -s 192.168.42.24 00-02-16-00-00-01 OKI OkiLAN 6010e User's Guide IV - 11 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 102
    and additional configuration options. DHCP uses the same packet structure as BOOTP so current BOOTP relay agents will also interact with DHCP messages. IV - 12 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 103
    is using it. If the OkiLAN 6010e finds another device is using the address, it will refuse the address and start looking for a new address. OKI OkiLAN 6010e User's Guide IV - 13 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 104
    permanent address, the routing table entry should be deleted using route delete. For more information, consult your system documentation for the route command. IV - 14 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 105
    system supports, request the manual page for the protocol's daemon (e.g. man bootpd or man rarpd), or see your network manuals. Both protocols require that you add the product's network hardware address and IP address to a configuration file. See your network documentation for instructions or
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 106
    button, through the OkiNet or OkiNet for VINES utilities or via telnet. • If the settings appear to be correct, try repeating the installation steps. If problems persist, call Okidata Customer Support at 1-800-OKIDATA (1-800-654-3282). IV - 16 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 107
    operating system or computer manual for information about configuring remote network printing. If you are still unable to configure your computer system to print to the OkiLAN 6010e, contact Okidata Customer Support at 1-800-OKIDATA (1-800-654-3282). OKI OkiLAN 6010e User's Guide IV - 17 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 108
    computers that support TCP/IP network printing use the Remote Line Printer Daemon The Remote Print Queue Name determines which printer port will service the print job. The Remote Print the Remote Print Queue Name to determine which printer port will service the print job. All Remote Print Queue Names
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 109
    printers and print data. Typically you will select the printer type for your printer in telnet under the Configure Port option. However, if you are connecting to an ASCII printer , you may wish to use the OkiLAN 6010e to format the print data for your printer prompts the printer to print any
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 110
    is not added to the end of jobs. Configuring a BSD-Style Print Queue For remote BSD-Style LPD printing, add the OkiLAN 6010e as a remote printer in the "/etc/printcap" database to each host printing to the OkiLAN 6010e. You can add PRINTCAP options as needed. If you are unfamiliar with
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 111
    directory to work properly. When you are ready to print, use the local_print_queue_name that matches the data type of the file to be printed. OkiLAN 6010e_name This is the name (alias) of the must create a unique spool directory for each printcap entry. OKI OkiLAN 6010e User's Guide IV - 21 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 112
    where error information from the lpd will be logged. Example: If you are printing to an ASCII printer that requires a carriage return/line feed, you may need two separate printcap entries: one entry for must have a different spool directory to work properly. IV - 22 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 113
    receiving files. The OkiLAN 6010e supports a subset of the FTP command set. This subset allows the FTP user to open a connection to the OkiLAN 6010e, specify a file transfer data type and send print files to a Remote Print Queue Name on the OkiLAN 6010e. OKI OkiLAN 6010e User's Guide IV - 23 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 114
    . SEND Treated the same as PUT. MPUT Print multiple files. TYPE Changes the representation type used for data transfer. Image (or binary) and ASCII are the only types supported. ASCII Equivalent to "TYPE ASCII". BINARY Equivalent to "TYPE BINARY". IMAGE Equivalent to "TYPE IMAGE". STRU
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 115
    IV - TCP/IP Specifies transfer mode. Stream is the only transfer mode supported. OPEN Opens connection to remote host. CLOSE Terminates FTP session. QUIT prints a PostScript file called chart.ps to the OkiLAN 6010e printer Port 1 using FTP. TCP/IP OKI OkiLAN 6010e User's Guide IV - 25
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 116
    put chart.ps MPX1 local: chart.ps remote: MPX1 200 PORT command successful. 150 Opening BINARY mode data connection for MPX1. 226 Transfer complete. 4549 bytes sent in 0 seconds (4.4 Kbytes/s) ftp> bye to the OkiLAN 6010e with the OPEN command. IV - 26 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 117
    Section IV - TCP/IP Raw Port Printing Host computer software can use a raw TCP/IP port connection to send data to the OkiLAN 6010e. A TCP/ IP port has been assigned to the output port of the OkiLAN 6010e as follows: TCP/IP Port Output Port
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 118
    TCP/IP Overview This section contains information about OkiNet for TCP/IP. OkiNet for TCP/IP provides SNMP-based support for the entire OkiLAN 6010e family of print servers. OkiNet for TCP/IP allows you to: • Easily with Windows 3.x, Windows NT and Windows 95. IV - 28 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 119
    Print Servers view is selected and all print servers attached to the subnet of the network from which the OkiNet utility is running are listed. OKI OkiLAN 6010e User's Guide IV - 29 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 120
    the applicable file folder tabs. The following settings are configurable: • TCP/IP • Output Port • NetWare • SNMP • NetWare Port • Protocols • NetWare Queues • SNMP Traps IV - 30 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 121
    Section IV - TCP/IP Configuring TCP/IP Options To configure options specific to the TCP/IP protocol, select the TCP/IP tab. The following screen will display: OKI OkiLAN 6010e User's Guide IV - 31 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 122
    as no subnet mask specified. CAUTION: If you select an invalid subnet mask, you may not be able to access the OkiLAN 6010e. IV - 32 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 123
    /Http Password: Allows you to modify the current password required for Telnet or Http access. The default password is the serial number of the OkiLAN6010e. OKI OkiLAN 6010e User's Guide IV - 33 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 124
    Queues option allows you to add bindery print queues to be serviced by first selecting each desired queue and then selecting the § button Load Balancing Print jobs can be distributed to multiple printers on selected queues by selecting the same queue multiple times OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 125
    : OFF, PCL, PostScript or Automatic. Unless OFF is selected, a language switching character string will be inserted before each print job. The Printer Type selection is used to determine the actual characters required to switch your printer's language. OKI OkiLAN 6010e User's Guide IV - 35 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 126
    switch the printer to the PostScript printer language. • Automatic - Enables the auto language sensing function. This function examines the print job data stream and PCL Switch Sequence Enter the character string to switch the printer to the PCL print language. IV - 36 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 127
    the appropriate printer language for printing configuration pages on your printer. Output Type Select the appropriate baud rate. Bidirectional Printer Status Support Enable this option information, select the SNMP tab. The following screen will display: OKI OkiLAN 6010e User's Guide IV - 37 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 128
    of your choice. This name will identify the OkiLAN 6010e in your SNMP-based management program. System Contact Enter any information useful to a user if problems with the OkiLAN 6010e arise. System Location Enter a description of the OkiLAN 6010e location. IV - 38
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 129
    field is used by the OkiNet Alert and other network monitoring utilities for grouping or filtering OkiLAN 6010e devices. OkiNet Alert assists in managing network printers by immediately alerting you of printer problems. OKI OkiLAN 6010e User's Guide IV - 39 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 130
    Traps tab. Note: SNMP options need to be configured only if you are managing an OkiLAN 6010e or getting system information using SNMP. IV - 40 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 131
    field and then FFFFFFFFFFFF (12 characters) in the second field. Ports to Trap Select the output ports on which you wish traps to be active. OKI OkiLAN 6010e User's Guide IV - 41 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 132
    require that your printer be set to automatic emulation switching (the default) or PCL emulation. Saving the Configuration Once all settings have been defined, select OK. The settings will be saved and you will be returned to the main OkiNet for TCP/IP screen. IV - 42 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 133
    information is available on the following topics: • Printer • Print Server • Protocols • Network • Statistics • Technical Support • System Printing a Configuration Sheet The configuration sheet a job is printing, the job may not print successfully. OKI OkiLAN 6010e User's Guide IV - 43 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 134
    jobs when you select Restore Factory Defaults. If you reset the OkiLAN 6010e while a job is printing, the job may not print successfully. IV - 44 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 135
    the View menu. Enter a name for the new customized view. Define Filters, Sorts, Column, Search information and Refresh rates. Select OK to save this view. OKI OkiLAN 6010e User's Guide IV - 45 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 136
    Filter Value No value DateCode Four digits followed by a letter (e.g. 9502B) Default Gateway XXX.XXX.XXX.XXX; use "*" for groups / subnets IV - 46 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 137
    have a large number of OkiLAN 6010e print servers on your local network and wish to minimize network traffic, do not select this option. TCP/IP OKI OkiLAN 6010e User's Guide IV - 47
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 138
    added to the end of the list and the column will be displayed to the right of the last column on the screen. IV - 48 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 139
    is an issue, you may wish to set the refresh rate to 10. This would update the screen every ten minutes and minimize network traffic. OKI OkiLAN 6010e User's Guide IV - 49 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 140
    selected. Set Community Name Enter the Set Community Name necessary to access the OkiLAN 6010e or group of OkiLAN 6010e print servers selected. IV - 50 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 141
    OkiLAN 6010e print servers on a UDP port number. Normally, using this port number should not interfere with other devices on the network. If there are problems using the given port number, select a new number. Note: Windows NT will not permit the use of Port 9 for discovery. Select one of the other
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 142
    /IP Starting a Telnet Session A simple telnet interface has been provided to communicate with devices supporting telnet. A telnet session can be started by selecting the OkiLAN 6010e from the print server information, view the on-line help for the BOOTP server. IV - 52 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 143
    Configuration utility (telnet) provides system, network and printer status information and allows you to change the configuration configuration. See pages IV-37 through IV-39 for instructions on setting community names. Running a Telnet Session 1. echoed. OKI OkiLAN 6010e User's Guide IV - 53 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 144
    display. An explanation of each option follows. OkiLAN 6010e Configuration Utility 1. Show Network/Printer Information 2. Change Password 3. Specify Print Server IP Address 4. Specify Subnet Mask For Your type its number and press Enter. To quit, press Enter. IV - 54 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 145
    Information (Option 1) This option displays current network and printer information. Changing the Password (Option 2) This option allows you to change the password required will remain undetected until the OkiLAN 6010e is reset or is powered off and on. OKI OkiLAN 6010e User's Guide IV - 55 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 146
    255. The default subnet mask is 0.0.0.0. The OkiLAN 6010e interprets a subnet mask of 0.0.0.0 or 255.255.255.255 as no subnet mask specified. IV - 56 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 147
    you select an invalid default gateway or the default gateway goes down, the OkiLAN 6010e may not be able to communicate with non-local networks. OKI OkiLAN 6010e User's Guide IV - 57 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 148
    • Language Switching Sequence - If you select Custom Printer from the Configure Printer Type screen, you must indicate the switching sequence to be used for both PCL and PostScript. This is only necessary if language switching is set to something other than OFF. IV - 58 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 149
    for future product modifications and enhancements. It requires an update file from OKIDATA. CAUTION: Do NOT use this option without having the upgrade files on Web: http://www.okidata.com Firmware update instructions are available with the download file. OKI OkiLAN 6010e User's Guide IV - 59 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 150
    the TCP/IP protocol to factory defaults. If you reset the OkiLAN 6010e while a job is printing, the job may not print successfully. IV - 60 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 151
    Section IV - TCP/IP Appendix A: Troubleshooting Main Status Indicator Upon power-up, the main status indicator flashes orange. It changes to green indicator turns solid green. 3. Power cycle the OkiLAN 6010e. It will have restored itself to defaults. OKI OkiLAN 6010e User's Guide IV - 61 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 152
    you ping the device and are not getting a response, the glean is not working. Check the following possible problems: • Verify the ARP table contains the correct hardware and IP address by running the 'arp -a' command. cycle the device and try the glean again. IV - 62 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 153
    the SIGHUP signal to the running BOOTP server. For example, kill -HUP tells it to reread "/etc/bootptab". Most BOOTP servers support this option. Check your local BOOTP documentation. If this does not work, restart the BOOTP server (kill and restart the process
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 154
    's routing tables with the 'netstat -r' command. Verify the route has been set correctly. • If the route is set correctly, try pinging the device. IV - 64 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 155
    than the one you intended. While in telnet, select the second menu option, Show Network/ Printer Information. The hardware address and serial number are displayed. Verify they are the same as the shared with another device that does not support telnet. OKI OkiLAN 6010e User's Guide IV - 65 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 156
    the network cable is not connected. • Check the cable connection to the OkiLAN 6010e. • Move the OkiLAN 6010e to another known working node. IV - 66 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 157
    Customer Support at 1-800-OKIDATA (1-800-654-3282). Printing a Configuration Page If the status indicator turns solid orange due to an error and no configuration page is printed, your printer may be configured for PostScript operation. If so, you must re-configure your printer for standard ASCII
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 158
    , check the printer settings. For example, if you are using a PostScript printer, verify the OkiLAN 6010e is also set to PostScript. • Try pinging the OkiLAN 6010e by its IP address (not the hostname). This will verify the unit is functioning on the network. IV - 68 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 159
    ftp succeeds, there is a problem with the lpr/lp setup. Verify the hostname or IP address is correctly set for the queue. Try doing an lpstat (System V) or lpq (BSD) to query the status of the OkiLAN 6010e. FTP • If the indicator blinks green, the printer is receiving data. If nothing is actually
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 160
    Printing • Configuring IBM's AIX ver. 3.x for Printing • Configuring the OkiLAN 6010e for Solaris Printing • Configuring Sun-OS v4.1.x or Ultrix v4.2 for Printing IV - 70 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 161
    expressed in 6 bytes (hexadecimal format) usually separated by colons. Each hexadecimal byte has a range from 00 to FF. Example: 00:40:68:17:50:A4 OKI OkiLAN 6010e User's Guide IV - 71 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 162
    entries where each entry maps a network hardware address to an IP address. Example: OKIPRINTER:\ ht=ether:\ ha=0040681750A4:\ ip=192.168.42.55 IV - 72 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 163
    up the network hardware address in the "/ etc/bootptab" file. The bootpd daemon finds the associated IP address of the device in the bootptab file. OKI OkiLAN 6010e User's Guide IV - 73 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 164
    options differ from one UNIX workstation to another. Perform a man ps at the UNIX prompt to consult a manual page on the ps command for a particular workstation. If bootpd is not running on a workstation, type of the BOOTP server belong to the same subnet. IV - 74 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 165
    to change and/or make the IP address permanent. This means that a RARP server needs to be available only during installation of the OkiLAN 6010e. OKI OkiLAN 6010e User's Guide IV - 75 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 166
    " file is where each entry maps a host name to an IP address. An example entry is shown below. 192.168.42.55 OKIPRINTER IV - 76 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 167
    and looks up the name OKIPRINTER. It finds an IP address (in this case 192.168.42.55) associated with the name OKIPRINTER. TCP/IP OKI OkiLAN 6010e User's Guide IV - 77
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 168
    options differ from one UNIX workstation to another. Perform a man ps at the UNIX prompt to consult a manual page on the ps command for a particular workstation. If rarpd is not running on a workstation, type man of the RARP server belong to the same subnet. IV - 78 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 169
    name on the HP-UX system to which print jobs that are destined for a printer attached to the OkiLAN 6010e will be directed. • OKIPRINTER - The host name of 6010e and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters of the
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 170
    executing this command), kill the process with the command: kill -15 process_number 3. Make sure the following entry is in the "etc/ inetd.conf" file: printer stream tcp nowait root /usr/lib/ rlpdaemon rlpdaemon -i If the rlp daemon is not running when a print request is made, this entry in "/etc
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 171
    inetd.conf. 4. Make sure the following entry is in the "/etc/ services" file printer 515/tcp spooler 5. Start inetd by typing the following at the UNIX Devices -> Printers and Plotters -> Actions -> Add a Remote Printer (Do NOT select Add a Network Printer) OKI OkiLAN 6010e User's Guide IV - 81
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 172
    the queue on the OkiLAN 6010e and must end with 1, 2, 3, or 4, depending on the port selected to service the print jobs. d) Remote cancel model - rcmodel Used for remote printer job removal. e) Remote status model - rsmodel Used for remote printer queue status. IV - 82 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 173
    using SAM. Peripheral Devices -> Printers and Plotters -> Enable a Printer ... 7. Printer name: - lj4 8. Start the LP request scheduler by typing: /usr/lib/lpsched 9. Run a test print job to the OkiLAN 6010e with the following command: lp -d lj4 filename OKI OkiLAN 6010e User's Guide IV - 83 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 174
    to which print jobs will be directed. The print jobs are destined for a printer attached to the OkiLAN 6010e. • OKIPRINTER - The host name of the remote system and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters of the
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 175
    this command. If rlp is running (that is, if you see output after executing this command), kill the process with the command: kill -15 process_number OKI OkiLAN 6010e User's Guide IV - 85 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 176
    printer stream tcp nowait root "/usr/lib/ rlpdaemon" rlpdaemon -i If the rlp daemon is not running when a print request is made, this entry in "/etc/ inetd.conf" will tell inetd to auto-start the rlp daemon and service entry is in the "/etc/ services" file: printer 515/tcp spooler 5. Start inetd by
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 177
    by the local HP machine. Print jobs sent to this printer are passed to the OkiLAN 6010e. b) Remote system name - OKIPRINTER The name of the OkiLAN 6010e on the network. The name must also be in the / etc/hosts file. c) Remote printer name - yourqueuename OKI OkiLAN 6010e User's Guide IV - 87 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 178
    service the print jobs. d) Remote cancel model - rcmodel Used for remote printer job removal. e) Remote status model - rsmodel Used for remote printer queue status. f) Printer class - (optional) g) Make this the system default printer with a Berkeley style remote printer (such as LPD). 5.
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 179
    HP-UX system to which print jobs will be directed. The print jobs are destined for a printer attached to the OkiLAN 6010e. • OKIPRINTER - The host name of the remote system which is 2, 3 or 4, depending on the port selected to service the print jobs. OKI OkiLAN 6010e User's Guide IV - 89 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 180
    . If rlp is running (that is, if you see output after executing this command), kill the process with the command: kill -15 process_number IV - 90 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 181
    services" file: printer 515/tcp spooler 5. Start inetd by typing the following at the UNIX prompt: /etc/inetd -c Procedure HP-UX uses an interactive utility called SAM (System Administration Manager) to configure printing. 1. Login to the HP-UX system as root. OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 182
    The name of the printer as referenced by the local HP machine. Print jobs sent to this printer are passed to the OkiLAN 6010e. b) Remote system name - OKIPRINTER The name of the OkiLAN 6010e on the network. The name must also be in the / etc/hosts file. IV - 92 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 183
    box. Tells the HP-UX system that it is communicating with a Berkeley style remote printer (such as LPD). 5. Select the OK button. A status window will outline the tasks performed to install the queue. When you see the message task completed, select OK. OKI OkiLAN 6010e User's Guide IV - 93 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 184
    . • lj4 - The local queue name of the SCO system to which print jobs that are destined for a printer attached to the OkiLAN 6010e will be directed. • OKIPRINTER - The host name of the remote system which is for the OkiLAN 6010e, the IP address may be used. IV - 94 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 185
    the queue on the OkiLAN 6010e and must end with 1, 2, 3 or 4 depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters of the queue name, the job will Install even if remote line printing may already be installed. OKI OkiLAN 6010e User's Guide IV - 95 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 186
    respond saying Run '/etc/rlpconf' to change the remote printer description file. Do NOT run "/etc/rlpconf". We will be performing the functions of "/etc/rlpconf" manually. 5. The next prompt is Do you want to start spool/lpd/lj4:\ :lf=/usr/spool/lpd/lj4/lj4.log: IV - 96 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 187
    • lj4 - The local queue name on the AIX system to which print jobs that are destined for a printer attached to the OkiLAN 6010e will be directed. • OKIPRINTER - The host name of the remote system which is for the OkiLAN 6010e, the IP Address may be used. OKI OkiLAN 6010e User's Guide IV - 97 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 188
    OkiLAN 6010e and must end with 1 or 2, depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters Spooler (Print Jobs and Printers) Manage Remote Printer Subsystem Client Services Remote Printer Queues Add a Remote Queue IV - 98 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 189
    also be contained in the "/etc/hosts" file. c) Name of QUEUE on remote printer - yourqueuename d) NAME of device to add - "any arbitrary name" This is a device name required by AIX, but this name has no effect on the print service for the OkiLAN 6010e. Enter any name of seven characters or less. The
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 190
    lpd subsystem with SMIT: Spooler (Print Jobs and Printers) Manage Remote Printer Subsystem Server Services lpd Remote Printer Subsystem Start Using the lpd Subsystem Start BOTH Now that are destined for a printer attached to the OkiLAN 6010e will be directed. IV - 100 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 191
    the queue on the OkiLAN 6010e and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters of the queue name, the job will 2. Make sure the LPD daemon is running on the Solaris system. OKI OkiLAN 6010e User's Guide IV - 101 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 192
    represent general devices or concepts. • lj4 - The local queue name on the Sun-OS or Ultrix system to which print jobs that are destined for a printer attached to the OkiLAN 6010e will be directed. IV - 102 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 193
    of the queue on the OkiLAN 6010e and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters of the queue name, the job will in the "/ etc/hosts" file on the Sun-OS or Ultrix system. OKI OkiLAN 6010e User's Guide IV - 103 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 194
    when the system boots, make sure that lines similar to the following exist in the "/etc/rc" file: if [ -f /usr/lib/lpd ] ; then rm -f /dev/printer/var/spool/lpd.lock /usr/lib/lpd; echo -n ' printer' fi IV - 104 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 195
    UNIX prompt, type: mkdir /usr/ spool/lj4 4. Type: touch /usr/spool/lj4/lj4.log 5. Try printing by issuing the following com- mand: lpr -Plj4 filename OKI OkiLAN 6010e User's Guide IV - 105 TCP/IP
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 196
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 197
    Windows Printing Section V: Windows Printing
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 198
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 199
    95 V-20 Overview V-20 OkiLAN 6010e Connect for TCP/IP ..........V-20 OkiLAN 6010e Connect for DLC V-24 Output Port Configuration Options V-26 Enabling/Disabling V-26 OKI OkiLAN 6010e User's Guide V - 3
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 200
    Section V - Windows Printing V - 4 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 201
    6010e Set Up for Windows NT 4.0 Overview This section contains instruction and information on how to set up your OkiLAN 6010e for direct, TCP/IP printing from your computer to a printer attached to an OKI TCP/IP enabled print server. OkiLAN 6010e Connect has OKI OkiLAN 6010e User's Guide V - 5
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 202
    , Settings and then Printers. 3. Select the Windows printer from which you would like to print with the OkiLAN 6010e Connect, then select Properties from the menu. 4. Add an OkiLAN 6010e Connect port. This may be done by selecting Add Port under the Ports tab. V - 6 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 203
    Windows Printing Section V - Windows Printing 5. From the list of Available Printer Ports, select OKI OkiLAN 6010e Connect IP Monitor as the type of port to add and click New Port. OKI OkiLAN 6010e User's Guide V - 7
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 204
    Section V - Windows Printing You will enter into the Add OkiLAN 6010e Connect Port screen where there will be a list of all OkiLAN 6010e print servers available on the local subnet. V - 8 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 205
    to use OkiLAN 6010e Connect for TCP/IP. Whenever you print to the printer configured with OkiLAN 6010e Connect, your print job will go directly to the an alert when your job is active on the printer. This may be useful if the printer is especially busy. Description An optional field where you
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 206
    , and send jobs to the printer. Note: To obtain a version of OkiLAN 6010e Connect for DLC that supports Windows NT, visit our FTP site (ftp://ftp.extendsys.com/pub/printserver/utilities/) or contact Technical Support. Configure Port If you have printing problems while using the OkiLAN 6010e Connect
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 207
    Windows NT installation; therefore, it will need to be installed. In order to set up an LPR printer in Windows NT 4.0, the system must have an IP address, the print server must have an IP address Internet access, it is suggested to use 10.10.10.1). Click OK. OKI OkiLAN 6010e User's Guide V - 11
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 208
    Printer 1. Open the Control Panel, Printers and then select Add Printer. 2. Select My Computer and click Next. 3. Click the Add Port button. 4. On the Printer Ports screen, select LPR Port from the list of Available Printer Ports and click the New Port button. V - 12 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 209
    Printing Section V - Windows Printing 5. In the Name or address of server providing lpd: field, enter the IP address you assigned to the printer. 6. In the Name of printer or print queue on that server: field, enter the print server output port being used. For example, for port 1 enter P1, for
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 210
    Verify the port just added is selected and then click Next. 9. Select a printer driver and click Next. 10. Enter a name for the printer and click Next. 11. To share the printers with others on the network, select Shared and enter a share name for the printer. V - 14 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 211
    Set Up for Windows NT 3.51 Overview This section contains instruction and information on how to set up your OkiLAN 6010e , direct, TCP/IP printing from your computer to a printer attached to an OKI TCP/IP enabled print server. OkiLAN 6010e Connect has advantages OKI OkiLAN 6010e User's Guide V - 15
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 212
    instructions below: 1. Install the OkiLAN 6010e Connect for TCP/ IP files-see Section I. 2. From the Windows NT Print Manager Printer menu select Create Printer. 3. In the Create Printer window select: • Printer Name • Driver . Click the Add button. 7. Click OK. V - 16 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 213
    Connect for DLC OkiLAN 6010e Connect for Data-Link Control (DLC) provides a printer, and send jobs to the printer. Note: To obtain a version of OkiLAN 6010e Connect for DLC that supports Windows NT, visit our website (www.Okidata.com) or contact Customer Support OKI OkiLAN 6010e User's Guide V - 17
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 214
    Add Network Software window. Click Continue. 5. Select Connectivity Utilities and TCP/IP Network Printing Support from the Windows NT TCP/IP Installation Options window. Note: If either of these items . 7. Shutdown the application and restart Windows NT. V - 18 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 215
    Printer 1. From the Windows NT Print Manager Printer menu, select Create Printer. 2. In the Create Printer window select: • Printer Name • Driver a number indicating the desired print server's output port for the printer name prompt and click OK. For example, for port 1 enter P1, for port
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 216
    Set Up for Windows 95 Overview This section contains instruction and information on how to set up your OkiLAN allows simple, direct, TCP/IP printing from your computer to a printer attached to an OKI TCP/IP enabled print server. With OkiLAN 6010e Connect, you can 20 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 217
    To install OkiLAN 6010e Connect for TCP/IP, follow the instructions below: 1. Install the OkiLAN 6010e Connect for TCP/ IP-see Section I. 2. When installation is complete, click on Start, Settings and then Printers. 3. Select the Windows printer from which you would like to print with OkiLAN 6010e
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 218
    Section V - Windows Printing You will enter into the Add OkiLAN 6010e Connect Port screen where there will be a list of all OkiLAN 6010e print servers available on the local subnet. V - 22 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 219
    use OkiLAN 6010e Connect for TCP/IP. Whenever you print to the printer configured with OkiLAN 6010e Connect, your print job will go directly to the OkiLAN 6010e print server port. Port Settings If you have printing problems while using the OkiLAN 6010e Connect printing port, you may check the
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 220
    Settings and then Printers. 3. Select the printer driver from which you would like to print with OkiLAN 6010e Connect, then select Properties from the File menu. 4. Add an OkiLAN 6010e Connect port. This may be done by selecting Add Port under the Details tab. V - 24 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 221
    - Windows Printing 5. In the Add Port window, select the radio button labeled Other and select OKI OkiLAN 6010e Connect DLC Monitor as the type of port to add. Click OK. You will the OkiLAN 6010e print server port name and click the Add button. 7. Click OK. OKI OkiLAN 6010e User's Guide V - 25
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 222
    pages on your printer. Enabling/Disabling To enable or disable protocols on the OkiLAN 6010e, select the Protocols tab. Select each protocol you wish to enable. If you disable a protocol, the OkiLAN 6010e will no longer communicate using that protocol. V - 26 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 223
    NDS II-27 OkiNet for TCP/IP II-27 printer security for TCP/IP II-28 Security II-7 Assigning NetWare III-11 BOOTP assigning an IP address IV-15, IV-71 troubleshooting IV-63 BOOTP Server starting in OkiNet for TCP/IP IV-52 BSD troubleshooting in TCP/IP IV-67 Configuring for TCP/IP Network Printing IV
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 224
    Views II-27 Customer Information Center vii Customer Service Representatives vii Customer Support Center vii Customized Views creating in OkiNet for 20 OkiNet for TCP/IP IV-40 Error Messages TCP/IP hardware IV-66 F FTP troubleshooting IV-69 FTP Printing ASCII IV-24 BINARY IV-24 BYE IV-25 CLOSE IV-25
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 225
    IV-98 IP Address assigning BOOTP IV-15 DHCP IV-12 gleaning IV-11 RARP IV-15 static route entry IV-14 choosing IV-9 J JetAdmin Support NetWare configuration II-9 obtaining diagnostic information II-11 Overview II-9 TCP/IP configuration II-10 Index
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 226
    -23 SNMP access information III-27 view settings, modifying III-24 OkiNet for TCP/IP running the utility IV-29 starting a BOOTP server IV-52 troubleshooting IV-66 Index-4 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 227
    Print Server Class adding or removing in OkiNet for NDS III-39 Printer Traps in TCP/IP IV-42 Printing OkiLAN 6010e Connect for DLC III-12 R RARP assigning an IP address IV-15, IV-75 troubleshooting IV-63 Raw Port Printing IV-27 Remote LPD Printing IV-23 Remote OKI OkiLAN 6010e User's Guide Index-5
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 228
    IV-14 troubleshooting IV-64 Sun-OS v4.1.x Application prerequisites IV-103 procedure IV-105 T TCP/IP BOOTP IV-63 FTP IV-69 gleaning IV-62 hardware error messages IV-66 OkiLAN 6010e Connect for TCP/IP V-5 OkiNet for TCP/IP utility IV-66 RARP IV-63 Index-6 OKI OkiLAN 6010e User's Guide
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 229
    IV-41 Traps, SNMP advanced management II-6 configuring in NetWare III-18 U Ultrix v 4.2 Application prerequisites IV-103 Ultrix v4.2 Application procedure IV-105 UNIX BOOTP troubleshooting IV-63 Index OKI OkiLAN 6010e User's Guide Index-7
  • Oki ML591 | Users' Guide for the OkiLAN 6010e - Page 230
    -22 status II-21 support II-21 Web Admin configuration II-20 Web JetAdmin Support configuring the OkiLAN 6010e II-12 installing a Windows NT printer II-13 obtaining diagnostic information V-15, V-17 Windows NT 4.0 requirements V-11 Winsock troubleshooting IV-66 Index-8 OKI OkiLAN 6010e User's Guide
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
OkiLAN 6010e
Pocket Print Server
User’s Guide
High Performance Ethernet Network Print Server