Oki ML591 Users' Guide for the OkiLAN 6010e - Page 158

Section IV - TCP/IP If you do not know the configuration of the OkiLAN 6010e or you think the configuration has been changed, use the following method for printing a configuration page: • With the network cable detached, attach the OkiLAN 6010e to a printer and power cycle the print server. When the OkiLAN 6010e powers up, it will detect the detached network cable and print a configuration sheet. If no configuration sheet is printed and the indicator has turned green, check the printer and verify it is ready to print. If you are using boot protocols (RARP or BOOTP) to assign the IP address, the IP address will be listed as Using network protocol (0.0.0.0) on the configuration page. Unable to Print LPR/LP • If the indicator blinks green, the OkiLAN 6010e is receiving data. If nothing is actually printing, check the printer settings. For example, if you are using a PostScript printer, verify the OkiLAN 6010e is also set to PostScript. • Try pinging the OkiLAN 6010e by its IP address (not the hostname). This will verify the unit is functioning on the network. IV - 68 OKI OkiLAN 6010e User's Guide