Oki ML591 Users' Guide for the OkiLAN 6010e - Page 159

Section IV - TCP/IP • If the ping succeeds, try ftping a test file to the print server. If the ping fails, you might have a configuration problem with the OkiLAN 6010e (the IP address or gateway address might be incorrect, etc.). • If the ftp succeeds, there is a problem with the lpr/lp setup. Verify the hostname or IP address is correctly set for the queue. Try doing an lpstat (System V) or lpq (BSD) to query the status of the OkiLAN 6010e. FTP • If the indicator blinks green, the printer is receiving data. If nothing is actually printing, check the printer settings. For example, if you are using a PostScript printer, verify the OkiLAN 6010e is set to PostScript also. • Try pinging the device by its IP address (not the hostname). This will verify the OkiLAN 6010e is functioning on the network. • If you cannot connect over ftp but the ping succeeds, try telneting to the OkiLAN 6010e and print a configuration page to verify settings. If that fails, you might have a TCP/ IP configuration problem with the OkiLAN 6010e. OKI OkiLAN 6010e User's Guide IV - 69 TCP/IP