Oki ML591 Users' Guide for the OkiLAN 6010e - Page 21

Hardware Installation Section I - Hardware Installation Solution a) Unplug the OkiLAN 6010e power adapter from the wall outlet. Remove the network cable. Plug the network cable back in until you hear a positive click. Check the other end of the cable in the same manner. Plug the OkiLAN 6010e back in. If it does not detect a cable, continue below. b) Verify the cable is a 10Base-T cable and it has an RJ-45 end. The network cable must have a cat-3 or higher rating. Silver Satin or flat ribbon cable is not adequate. c) Connect to a network that a currently working PC or print server is using. If the OkiLAN 6010e is still unable to detect the network cable, contact Technical Support for assistance. LED Display LED is flashing green slowly (1 timer/sec); the OkiLAN 6010e is trying to print a job. Problem The printer is malfunctioning or does not have sufficient paper or toner. Solution Verify that the printer is not showing any errors and has sufficient paper and toner. LED Display LED is solid orange for more than 30 seconds Problem The printer server has failed the Power On Self Test. Solution The OkiLAN 6010e will try to print a configuration sheet on the printer with more information. OKI OkiLAN 6010e User's Guide I - 11