Oki ML591 Users' Guide for the OkiLAN 6010e - Page 170

Section IV - TCP/IP Prerequisites Before you proceed, the following prerequisites must be met. Most of the time, steps 2 through 5 are already configured since the HP-UX system is on a TCP/IP network. Do not perform steps 2 through 5 unless the installation procedure fails! 1. The name OKIPRINTER and the IP address assigned to the OkiLAN 6010e are in the "/ etc/hosts" file on the HP-UX system. 2. Make sure the rlp process is not running by typing at the UNIX prompt: ps -e | grep rlp If rlp is not running, you will not see any output after executing this command. If rlp is running (that is, if you see output after executing this command), kill the process with the command: kill -15 process_number 3. Make sure the following entry is in the "etc/ inetd.conf" file: printer stream tcp nowait root /usr/lib/ rlpdaemon rlpdaemon -i If the rlp daemon is not running when a print request is made, this entry in "/etc/ inetd.conf" tells inetd to auto-start the rlp daemon to service the pending print request. IV - 80 OKI OkiLAN 6010e User's Guide