Panasonic HPX300 Operating Instructions - Page 118
Contents of P2 Card Status Display, Settings, P2 Card used memory capacity/Total Capacity
UPC - 791871304297
View all Panasonic HPX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Contents of P2 Card Status Display Settings From the thumbnail menu, select PROPERTY CARD STATUS. The following screen appears. When "REMAIN" is selected: 1 2 DIR ENTRY NG CARD: The directory structure on the P2 card is not supported. For details on P2 card status indications, refer to [2. P2 Card Status (remaining free space)]. When "USED" is selected: 1 2 3 3 5 5 4 4 Chapter 6 Manipulating Clips with Thumbnails 1 Write-protect Mark The mark appears if the P2 card is write-protected. 2 P2 Card Status (remaining free space) The remaining memory capacity of the P2 card is indicated by a bar graph and percentage. The bar graph indicator moves to the left as the remaining free space decreases. The following indications may appear, depending on the card status: FORMAT ERROR!: An unformatted P2 card is inserted. NOT SUPPORTED!: An unsupported card is inserted in the camera. NO CARD!: No P2 cards are inserted. Use the cursor button to place the cursor on the P2 card for data you want to access and press the SET button to display detailed information about the P2 card to check individual information such as the serial number and the user ID. 3 P2 Card Remaining Capacity/Total Capacity Displays the P2 card remaining capacity and total capacity in minutes. The total remaining capacity for each P2 card will not show actual capacity since only time in minutes is displayed. Note that the indicated capacity will vary according to the frame rate in native recording with VFR operation. 4 Total remaining free space for the slot Displays the total remaining free space for both slots. Please note that the remaining capacity of a writeprotected P2 card is not included in the total remaining capacity. 5 Warning symbol Inserting the following type of P2 cards will display the ( ) symbol. RUN DOWN CARD: The maximum number of overwrites on the P2 card has been exceeded. 1 Write-protect Mark The mark appears if the P2 card is write-protected. 2 P2 Card Status (used memory capacity) The used memory capacity of the P2 card is indicated by a bar graph and a percentage figure. The bar graph indicator moves to the right as the used memory capacity increases. The following indications may appear, depending on the card status: FORMAT ERROR!: An unformatted P2 card is inserted. NOT SUPPORTED!: An unsupported card is inserted in the camera. NO CARD!: P2 cards are not inserted. Use the cursor button to place the cursor on the P2 card for data you want to access and press the SET button to display detailed information about the P2 card to check individual information such as the serial number and the user ID. 3 P2 Card used memory capacity/Total Capacity Displays the used memory capacity on a P2 card and the total capacity, in minutes. Because fractions are truncated, the figure shown for used memory capacity on a P2 card may differ from the figure for total capacity. The used memory capacity of a write-protected P2 card is displayed as 100%. Note that the indicated capacity will vary according to the frame rate in native recording with VFR operation. 4 Total used memory capacity for all slots Displays the total used memory capacity for both slots. 5 Warning symbol Inserting the following type of P2 cards will display the ( ) symbol. RUN DOWN CARD: The maximum number of overwrites on the P2 card has been exceeded. 118