Panasonic HPX300 Operating Instructions - Page 148
Inspecting the Memory Recording Functions, Inspecting the P2 Card Recording
UPC - 791871304297
View all Panasonic HPX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Chapter 9 Maintenance and Inspections Inspecting the Memory Recording Functions Make sure you successively carry out the inspections from [Inspecting the P2 Card Recording] to [Inspecting the Earphone and Speaker]. Inspecting the Audio Level Automatic Adjustment 1 Set the AUDIO SELECT CH1 and CH2 switches to [AUTO]. Inspecting the P2 Card Recording 2 Set the AUDIO IN switch to [FRONT]. 1 Check on the display inside the viewfinder that the remaining P2 card recording capacity is sufficient. For details, refer to [Screen displays] (page 66). 3 Aim the microphone connected to the MIC IN jack at an appropriate sound source. Then, check that the level displays for both CH1 and CH2 change according to the sound level. 2 Press the camera's REC button to check the following items: • The P2 access LED blinks in orange. • The REC indication in the viewfinder lights. • System warnings do not appear inside the viewfinder. Inspecting the Audio Level Manual Adjustment 1 Set the AUDIO IN switch to [FRONT]. 3 Press the camera's REC button again. • Check that the P2 access LED lights orange and that REC indication in the viewfinder clears. 4 Using the REC button on the handle, repeat Steps 2 to 3 to check the same operation. 2 Set the AUDIO SELECT CH1 and CH2 switches to [MAN]. 3 Turn the AUDIO LEVEL CH1 and CH2 controls. • Check that the level display increases when the controls are turned to the right. • Check the VTR button on the lens in the same way. Inspecting the Earphone and Speaker 5 Press the THUMBNAIL button to switch the thumbnail screen to play back currently recorded clip from thumbnail. • Check that playback is operating normally. 6 Use the USER button to which the SLOT SEL function has been assigned to select P2 cards for recording when more than one P2 card is inserted in the card slots. • Repeat the operations in Steps 2 to 3 and 5 to check that recording and playback operate properly. 1 Turn the MONITOR control to check that the speaker volume changes. 2 Connect an earphone to the PHONES jack. • Check that the speaker is turned off and the microphone sound can be heard from the earphone. 3 Turn the MONITOR control to check that the earphone volume changes. 148