Home » Panasonic Manuals » Video Cameras » Panasonic HPX300 » Manual Viewer

Panasonic HPX300 Operating Instructions - Page 129

Recording Setup Screen, User, Time, Date, Ext, Tcg, Frm.rate

UPC - 791871304297

Add to My Manuals
Save this manual to your list of manuals

Page 129 highlights

Chapter 7 Menu Operations Item AUTO KNEE SW Setting Notes Selects the function of the OUTPUT/AUTO KNEE. • In the following conditions, selecting ON: Setting AUTO KNEE to ON turns on the AUTO DRS results in the same operation KNEE function. mode as when ON is selected. OFF: The AUTO KNEE function is not available even - W hen set to 1080/30PN, 1080/24PN when AUTO KNEE is set to ON. mode. DRS: Setting AUTO KNEE to ON turns on the DRS - When set to 1080/60i mode with the (Dynamic Range Stretcher) function. (For details, refer 1/15, 1/30 shutter speed. to page 9.) RECORDING SETUP screen Item REC FUNCTION ONE SHOT TIME INTERVAL TIME START DELAY PREREC MODE TC MODE UB MODE Setting Notes Sets special recording modes. • N ot available in the following NORMAL: The special recording modes are not used. conditions. INTERVAL: Sets interval recording. - W hen REC SIGNAL is set to 1394 ONE SHOT: Sets one-shot recording. - W hen REC FORMAT is set to native LOOP: Sets loop recording. recording. For details, refer to [Special Recording Modes] - When SYSTEM MODE is set to (page 38). 1080-59.94i or 480-59.94i; and • This function is always set to NORMAL when the CAMERA MODE is set to 24P or power is turned on. 24PA. Sets the time interval for one-shot recording. • A vailable only when REC FUNCTION 1frm, 2frm, 4frm, 8frm, 16frm, 1s is set to ONE SHOT. For details, refer to [One shot recording (ONE SHOT REC)] (page 39). Sets the time interval of interval recording. • A vailable only when REC FUNCTION 2frm, 4frm, 8frm, 16frm, 1s, 2s, 5s, 10s, 30s, 1min, is set to INTERVAL. 5min, 10min For details, refer to [Interval recording (INTERVAL REC)] (page 39). This delays the start of interval and one-shot recording • Available only when REC FUNCTION by about 1 second. is set to INTERVAL or ONE SHOT. ON, OFF Sets PRE REC. • N ot available in the following ON, OFF conditions. For details, refer to [Pre-recording (PRE REC)] - W hen REC SIGNAL is set to 1394 (page 38). - W hen SYSTEM MODE is set to 720- 59.94P and VFR is set to ON. - When REC FORMAT is set to native recording. - When SYSTEM MODE is set to 1080- 59.94i or 480-59.94i; and CAMERA MODE is set to 24P or 24PA. - When REC FUNCTION is set to something other than NORMAL. Sets count correction when using the internal time • N ot available when operating at 24P, code generator. 24PA and 24PN. Then NDF is counted DF: Drop frame time code at all times. NDF: Non drop frame time code For details, refer to [Setting the Time Code] (page 60). Sets the data recorded in the camera user bits. USER, TIME, DATE, EXT, TCG, FRM.RATE For details, refer to [Setting user bits] (page 58). ____ indicates the factory setting 129

Section	Page
Read this first!	2
Precautions for Use	4
Chapter 1 Overview	8
Camera Unit Features	8
Recording and Playback Features	10
Outline of operations	12
Saving and editing on external devices	12
System Conﬁguration	13
Standard accessories	14
Chapter 2 Parts and Their Functions	15
Power Supply and Accessory Mounting Section	15
Audio (input) Function Section	16
Audio (output) Function Section	17
Shooting and Recording/Playback Functions Section	18
Menu/Thumbnail Operation Section	22
Time Code Section	23
Warning and Status Display Functions	24
LCD Monitor	24
Viewfinder	25
Chapter 3 Recording and Playback	26
Setting Date and Time of Internal Clock	26
P2 Cards	28
Inserting P2 Cards	28
Removing P2 Cards	28
To Prevent Accidental Erasure of P2 Card Content	29
P2 CARD ACCESS LED and status of P2 cards	29
P2 card recording times	30
Handling P2 Card Recording	31
Basic Procedures	32
Shooting	33
Normal Recording	33
Standard and Native Recording	34
Standard recording (pull-down recording)	34
Native recording	34
Variable Frame Rate (VFR) Recording	35
Native VFR Recording	35
Standard VFR recording(pulldown recording)	35
Using VFR Recording Function	36
Special Recording Modes	38
Pre-recording (PRE REC)	38
Interval recording (INTERVAL REC)	39
One-shot recording (ONE SHOT REC)	39
Loop recording (LOOP REC)	40
PROXY Recording Function (Optional)	40
Hot Swap Recording	40
REC REVIEW Function	40
Shot Marker (SHOT MARK) Recording Function	41
Text Memo Recording Function	41
Normal and Variable Speed Playback	42
Chapter 4 Adjustments and Settings for Recording	43
Selecting recording signals	43
List of recording formats and functions	44
Recording settings and recording function table	45
Selecting video output	45
List of recording, playback and output formats	46
Adjusting the White Balance and Black Balance	48
Adjusting the White Balance	48
Adjusting the Black Balance	49
Setting the Electronic Shutter	51
Setting the Shutter Mode and Speed	51
Placing the Camera-recorder in SYNCHRO SCAN Mode	51
FBC (Flash Band Compensation) Function	52
Setting FBC function	52
Assigning functions to USER buttons	53
Selecting Audio Input Signals and Adjusting Recording Levels	54
Selecting Audio Input Signals	54
Adjusting Recording Levels	54
Selecting Function for the FRONT AUDIO LEVEL Control	55
CH3 and CH4 Recording Levels	55
Setting Time Data	56
Recording time codes and user bits	57
Setting user bits	58
Entering the User Bits	58
Setting the Time Code	60
Externally Locking the Time Code	62
Outputting the time code externally	63
GENLOCK and time code input/output connection and setup	64
Counter Setting and Display	64
Viewfinder Screen Status Displays	65
Viewfinder Status Indication Layout	65
Selecting Viewfinder Display Information	65
Screen displays	66
Center Information Display	69
Checking and displaying shooting status	71
MODE CHECK indication	72
Center marker display	73
Safety zone markers	73
Audio level meter magnification	73
Zebra pattern display	74
Focus assist function	75
Adjusting and setting the LCD monitor	76
Waveform monitor function	77
Adjusting and Setting up the Viewfinder	78
Adjusting Right and Left Viewfinder Position	78
Diopter Adjustment	78
Using the Viewfinder	78
Emphasizing Image Outlines	79
Setting the viewfinder to monochrome mode	79
Handling setup data	80
Configuration of setup data files	80
Handling SD memory cards	81
Formatting, Writing and Reading an SD memory card	81
How to Use Scene File Data	82
Saving scene files and other settings on SD memory cards	84
Chapter 5 Preparation	86
Power Supply	86
Mounting the Battery and Setting the Battery Type	86
Use of the external DC power supply	88
Mounting and Adjusting the Lens	89
Mounting the Lens	89
Adjusting the Lens Flange Back	90
White Shading Compensation	91
Setting Chromatic Aberration Compensation (CAC)	92
Preparing for Audio Input	95
When Using the Front Microphone	95
Using a wireless receiver	95
When Using Audio Devices	96
Attaching Accessories	97
Mounting the Camera on a Tripod	97
Attaching the Shoulder Strap	97
Attaching the Rain Cover	98
Attaching the FRONT AUDIO LEVEL Control Knob	98
Attaching the Eye Cup	98
DC OUT Connector and External REC Start/Stop Switch Connection	99
Connecting the AJ-RC10G Remote Controller	100
Chapter 6 Manipulating Clips with Thumbnails	101
Thumbnail Operations	101
Thumbnail Manipulations Overview	101
Thumbnail Screen	102
Selecting Thumbnails	104
Playing back Clips	104
Switching the Thumbnail Display	105
Changing thumbnails	106
Shot Mark	106
Text Memo	107
Deleting Clips	108
Restoring Clips	109
Reconnection of Incomplete Clips	109
Copying Clips	109
Setting of Clip Meta Data	110
Setting of Proxy (optional)	114
Formatting a P2 Card	114
Formatting SD memory cards	115
Setting the Thumbnail Display Mode	115
Properties	116
Chapter 7 Menu Operations	120
Viewfinder and LCD Menus	120
Using the menus	120
Initializing the menu settings	121
Setup menu structure	122
Setup menu list	124
SCENE FILE screen	124
SYSTEM SETUP screen	126
SW MODE screen	128
RECORDING SETUP screen	129
AUDIO SETUP screen	130
OUTPUT SEL screen	132
DISPLAY SETUP screen	132
BATTERY SETUP screen	134
CARD FUNCTIONS screen	136
LENS SETUP screen	136
OTHER FUNCTIONS screen	137
DIAGNOSTIC screen	138
OPTION MENU screen	138
Chapter 8 Connecting to External Devices	139
Functionality Provided by Connections to USB 2.0 Connector	139
Connecting to a computer in USB device mode	139
USB host mode	140
Connections to the DVCPRO/DV Connector	145
Recording signals input to the DVCPRO/DV connector	145
Control of external devices through 1394 connection	146
Chapter 9 Maintenance and Inspections	147
Inspections Before Shooting	147
Preparing for Inspections	147
Inspecting the Camera Unit	147
Inspecting the Memory Recording Functions	148
Maintenance	150
Eyepiece Care	150
Cleaning Inside the Viewfinder	150
Charging the internal battery	150
Warning System	151
Warning Description Tables	151
Warning and Error Display for Thumbnail Operation and USB HOST MODE	153
Updating the firmware incorporated into the unit	155
Chapter 10 Index	156
Chapter 11 Specifications	160
Dimensions and specifications	160
Dimensions	160
Specifications	160

Match case Limit results 1 per page

1±¹

Chapter²·² Menu²Operations

Item

Setting

Notes

AUTO KNEE SW

Selects the function of the OUTPUT/AUTO KNEE.

ON:

Setting AUTO KNEE to ON turns on the AUTO

KNEE function.

OFF:

The AUTO KNEE function is not available even

when AUTO KNEE is set to ON.

DRS:

Setting AUTO KNEE to ON turns on the DRS

(Dynamic Range Stretcher) function. (For details, refer

to page 9.)

• In the following conditions, selecting

DRS results in the same operation

mode as when ON is selected.

- When set to 1080/30PN, 1080/24PN

mode.

- When set to 1080/60i mode with the

1/15, 1/30 shutter speed.

RECORDING SETUP screen

Item

Setting

Notes

REC FUNCTION

Sets special recording modes.

NORMAL:

The special recording modes are not used.

INTERVAL:

Sets interval recording.

ONE SHOT:

Sets one-shot recording.

LOOP:

Sets loop recording.

For details, refer to [Special Recording Modes]

(page 38).

• This function is always set to NORMAL when the

power is turned on.

• Not available in the following

conditions.

- When REC SIGNAL is set to 1394

- When REC FORMAT is set to native

recording.

- When SYSTEM MODE

is set to

1080-59.94i or 480-59.94i; and

CAMERA MODE is set to 24P or

24PA.

ONE SHOT TIME

Sets the time interval for one-shot recording.

1frm, 2frm, 4frm, 8frm, 16frm, 1s

For details, refer to [One shot recording (ONE SHOT

REC)] (page 39).

• Available only when REC FUNCTION

is set to ONE SHOT.

INTERVAL TIME

Sets the time interval of interval recording.

2frm, 4frm, 8frm, 16frm, 1s, 2s, 5s, 10s,

30s, 1min,

5min, 10min

For details, refer to [Interval recording (INTERVAL

REC)] (page 39).

• Available only when REC FUNCTION

is set to INTERVAL.

START DELAY

This delays the start of interval and one-shot recording

by about 1 second.

ON, OFF

• Available only when REC FUNCTION

is set to INTERVAL or ONE SHOT.

PREREC MODE

Sets PRE REC.

ON, OFF

For details, refer to [Pre-recording (PRE REC)]

(page 38).

• Not available in the following

conditions.

- When REC SIGNAL is set to 1394

- When SYSTEM MODE

is set to 720-

59.94P and VFR is set to ON.

- When REC FORMAT is set to native

recording.

- When SYSTEM MODE is set to 1080-

59.94i or 480-59.94i; and CAMERA

MODE is set to 24P or 24PA.

- When REC FUNCTION is set to

something other than NORMAL.

TC MODE

Sets count correction when using the internal time

code generator.

DF:

Drop frame time code

NDF:

Non drop frame time code

For details, refer to [Setting the Time Code] (page 60).

• Not available when operating at 24P,

24PA and 24PN. Then NDF is counted

at all times.

UB MODE

Sets the data recorded in the camera user bits.

USER, TIME, DATE, EXT, TCG, FRM.RATE

For details, refer to [Setting user bits] (page 58).

____ indicates the factory setting