Panasonic HPX300 Operating Instructions - Page 76
Adjusting and setting the LCD monitor, Using the LCD Monitor
UPC - 791871304297
View all Panasonic HPX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Chapter 4 Adjustments and Settings for Recording Adjusting and setting the LCD monitor Using the LCD Monitor 1 Turn on the POWER switch of the AGHPX300P. 2 Slide the OPEN button in the arrow A direction to open the LCD monitor. 4 Use the subscreen in the menu option LCD SETTING in the DISPLAY SETUP screen to adjust screen color level, brightness and contrast. For details on menu operation, refer to [Using the menus] (page 120). • At LCD SETTING of the DISPLAY SETUP screen, select CHANGE. DISPLAY SETUP MARKER SAFETY ZONE FOCUS BAR LCD SETTING SELF SHOOT LCD BACKLIGHT SYNC SCAN DISP DATE/TIME ON 90% ON RETURN CHANGE NORMAL sec OFF PUSH MENU TO RETURN NOTE The LCD monitor opens to an angle of 120 degrees. Attempts to open it further will damage the monitor. 3 Adjust the angle of the LCD monitor for most convenient viewing. • The monitor can turn up to 180 degrees towards the lens and up to 90 degrees towards you. NOTE To prevent camera-recorder failure, do not use force when adjusting the monitor (when open). 5 Use the JOG dial button to select an item. LCD SETTING LCD COLOR LEVEL [ ] [+] LCD BRIGHTNESS [ ] [+] LCD CONTRAST [ ] [+] PUSH MENU TO RETURN 6 Press the JOG dial button, and turn the JOG dial button to adjust the selected item. LCD SETTING LCD COLOR LEVEL [ ] [+] LCD BRIGHTNESS [ ] [+] LCD CONTRAST [ ] [+] PUSH MENU TO RETURN NOTE • Pressing the RESET button when a value that can be adjusted is selected in the setting menu LCD SETTING will return the setting to its factory default. • When closing the LCD monitor make sure that it is shut tight. • In an environment with sudden temperature changes, condensation may form on the liquid crystal surface of the monitor. If this happens, wipe off the moisture with a soft, dry cloth. 76