Panasonic HPX300 Operating Instructions - Page 21
P2 CARD ACCESS LED, SDI OUT 1 connector
UPC - 791871304297
View all Panasonic HPX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Chapter 2 Parts and their Functions 20 P2 CARD ACCESS LED This LED indicates the recording and playback status of each card. For details, refer to [P2 CARD ACCESS LED and status of P2 cards]. (Page 29) 21 GENLOCK IN connector This connector inputs a reference signal when the camera unit is gen-locked, or when the time code is externally locked. NOTE • Supply an HD Y signal (1080/59.94i, 720/59.94P) or a composite signal (480/59.94i) as input reference signal. The subcarrier of VIDEO OUT connector output (composite signal) cannot be externally locked. In SD mode, the signal will not lock to the HD signal. 22 REMOTE connector Some functions can be remote controlled when the remote control unit AJ-RC10G (optional accessory) is connected to the camera. For details, refer to [Connecting the AJ-RC10G Remote Controller] (page 100). 23 VIDEO OUT connector This connector outputs video signals. • In HD mode, down-converted composite video signals are output. • Use the menu option DOWNCON MODE in the OUTPUT SEL screen to set signal output. (The factory setting is LETTER BOX.) 24 SD memory card slot Insert an SD memory card (optional accessory) in this slot. It is used for recording and loading camera setting menus or lens files, uploading meta data and recording proxies (optional). NOTE SD memory card precautions • Use only SD memory cards that conform to the SD standard or the SDHC standard in this camera. • MultiMediaCards (MMC) cannot be used. (Use of such cards may prevent recording.) • Be sure to use mini SD card adapters when using mini SD cards with this camera. (Note that this camera will not operate normally when a mini SD adapter is installed without inserting a card. Be sure to insert a card when an adapter is installed.) • Use of Panasonic SD memory cards and mini SD cards is recommended. Be sure to format such cards in this camera. • This unit supports the following SD and SDHC memory card capacities. SD memory cards 8MB/16MB/32MB/64MB/ 128MB/256MB/512MB/1GB/ 2GB SDHC memory cards 4GB/6GB/8GB/12GB/16GB/ 32GB For proxy (optional) recording, use 256 MB, 512 MB, 1 GB, 2 GB SD memory cards labeled "High Speed" or SDHC memory cards. • For the latest information not available in the Operating Instructions, visit the P2 Support Sites at the following Web site. https://eww.pavc.panasonic.co.jp/pro-av About SD and SDHC memory cards • The SDHC card is a new standard, established by the SD Card Association in 2006, for memory cards with capacities of 2 GB or more. • The SD logo is a registered trademark. • MMC (MultiMediaCard) is a registered trademark of Infineon Technologies AG. 25 BUSY (operation mode display) lamp This lamp indicates the active status of the SD memory card. It stays illuminated when the card is active. NOTE Do not remove the card while the lamp is on. The SD memory card could be damaged. 26 DVCPRO/DV connector An IEEE1394 standard connector for input and output of video, audio and data. For details, refer to [Connections to the DVCPRO/DV Connector] (page 145). 27 SDI OUT 1 connector 28 SDI OUT 2 connector • This connector outputs SDI signals. • Use the menu option SDI SELECT in the OUTPUT SEL screen to select AUTO, 1080i or 480i. This connector does not support up-conversion. It outputs the same signals as SDI OUT 1 connector. 29 SCENE FILE dial This dial allows you to select and load shooting conditions from the scene files prerecorded to each of the six positions. NOTE During recording, selecting a position with a different frame rate will not change the frame rate until the camera is set to recording standby mode. For details, refer to [How to use Scene File Data] (page 82). 30 FOCUS ASSIST button Turns magnification of the center portion of the image on and off. For details, refer to [Focus assist function] (page 75). 31 REC switch Switches functions of the REC button on the handle. ON: Enables the REC button. OFF: Disables the REC button. 32 USB lamp This lamp lights when the camera is in USB mode (PC mode). 21