Panasonic HPX300 Operating Instructions - Page 121

Chapter 7 Menu Operations 5 Use the JOG dial button to change the setting value. SW MODE LOW GAIN MID GAIN HIGH GAIN ATW ATW TYPE W.BAL.PRESET USER MAIN USER1 0dB 6dB 12dB OFF 1 3.2K 5.6K BACK LIGHT PUSH MENU TO RETURN Initializing user files and scene files simultaneously You can return the user files and the six scene files to their factory defaults by selecting YES in the menu option MENU INIT in the OTHER FUNCTIONS screen. 6 To change other settings, repeat steps 4 and 5. • When you finish, press the MENU button to return to the function screen. 7 To change other functions, repeat steps 2 to 5. • To exit the function screen and return to the normal screen, press the MENU button again.  NOTE Direct close function When the MENU button is pressed and held down after making a menu setting, the setting menu screen closes without first returning to the previous setting menu. To quickly change settings (MASTER PED and H PHASE only) • Fast UP Hold down the JOG dial button while turning it upwards and maintain this position. • Fast DOWN Hold down the JOG dial button while turning it downwards and maintain this position. Initializing the menu settings The menu settings contain both the user file settings and the scene file settings. You can initialize them separately. To initialize scene files (i.e. all the settings other than the scene file settings) Select INITIAL in USER FILE of the OTHER FUNCTIONS screen. The current menu settings of user file will return to the factory settings. To initialize the scene file From the 6 scene files, select the one you want to initialize with the SCENE FILE dial. Then in the SCENE FILE screen, LOAD/SAVE/INIT, select INITIAL. The settings for only the selected scene file are returned to the factory settings. • This does not affect the other scene files. 121