Panasonic HPX300 Operating Instructions - Page 127
Dvcpro Hd/60p, 60i, 30p, 24p
UPC - 791871304297
View all Panasonic HPX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Chapter 7 Menu Operations Item REC FORMAT CAMERA MODE SCAN REVERSE ASPECT CONV SETUP PC MODE SELECT PC MODE Setting Notes (Continued from the previous page) • Not available when 1080i or 720P DVCPRO HD/60P, DVCPRO HD/30PN, is set in SYSTEM MODE and REC DVCPRO HD/24PN: Uses the DVCPRO HD codec SIGNAL is 1394. for recording. Shooting and recording at 60P, 30PN • Not available in USB DEVICE mode. (native recording) and 24PN (native recording). (when SYSTEM MODE is 480 - 59.94i) DVCPRO50/60i, DVCPRO/60i, DV/60i: These use DVCPRO50, DVCPRO and DV codecs, respectively. Use CAMERA MODE options to set shooting mode. Recording is locked at 60i. Sets the shooting mode of the camera during • D oes not appear when SYSTEM DVCPRO HD codec at 1080-59.94i or during MODE is set to 720-59.94P. 480‑59.94i. • Not available in the following 60i, 30P, 24P, 24PA conditions. - W hen the REC SIGNAL option is set to 1394. - When SYSTEM MODE is set to 1080- 59.94i and REC FORMAT is set to something other than DVCPROHD/ 60i. Cancels the image inversion that occurs with film lenses and anamorphic lenses. ON, OFF Selects the aspect ratio for recording at 480i. • Not available when SYSTEM MODE is SIDE CROP: Crops the right and left edges of the set to 1080-59.94i or 720-59.94P. image. LETTER BOX: Adds black bands at the top and bottom of the image. SQUEEZE: Compresses the image horizontally. Selects the setup level for the 480i video signal. 0%: Setup is switched to 0% for both VIDEO OUT output and recording. 7.5% A: Setup is switched to 7.5% for VIDEO OUT output and 0% for recording. Sets camera operating mode when PC MODE is set to • Not available when PC MODE is set ON and an external device is connected via USB. to ON. USB HOST: Selects USB 2.0 for connecting an external hard disk drive. (For details, refer to page 140.) USB DEVICE: Makes it possible to connect the camera to a computer via USB 2.0 to enable use of a P2 card as mass storage. (For details, refer to page 139.) Operates the camera according to mode selected using PC MODE SELECT. ON: Operates in PC MODE. OFF: Terminates PC MODE and returns the camera to normal operation. • This function is always set to OFF when the power is turned on. ____ indicates the factory setting 127