Panasonic HPX300 Operating Instructions - Page 45
Recording settings and recording function table, Selecting video output
UPC - 791871304297
View all Panasonic HPX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Chapter 4 Adjustments and Settings for Recording 1394 input recording mode (when the REC SIGNAL option is set to 1394) SYSTEM MODE 1080-59.94i 720-59.94P REC FORMAT Disabled Disabled Setting CAMERA MODE Disabled Disabled VFR Disabled Disabled FRAME RATE [FRAME] Disabled Disabled DVCPRO50/60i 480-59.94i DVCPRO/60i DV/60i Disabled Disabled Disabled Recording format *1 Recording time *2 1080/60i 720/60P DVCPRO HD 480/60i DVCPRO50 DVCPRO DV Approx. 64 min. Approx. 128 min. Approx. 256 min. Recording function PRE PROXY INTERVAL, REC (optional) ONE SHOT − − − − − − − − − − − − − − − *1 60P and 60i is recorded at 59.94P and 59.94i, respectively. *2 Recording times are indicated for a single 64 GB P2 card. Two cards double the recording time. LOOP REC − − − − − Recording settings and recording function table The recording modes of the camera can be made to operate as described below using the setting menus. Recording setting Enabled and disabled functions and operations Proxy Operating mode REC SIGNAL (MENU) REC FUNCTION (MENU) REC FORMAT, CAMERA MODE (MENU) *5 VFR PRE REC (MENU) function recording (Thumbnail menu) 1394 TEXT SHOT output MEMO MARK (optional) Recording via 1394 input 1394 Disabled Disabled (enabled at 480i) Disabled Enabled Enabled INTERVAL REC ONE SHOT REC LOOP REC INTERVAL ONE SHOT LOOP 60i, 60P, 30P only Disabled Disabled Disabled Disabled (Enabled at Disabled playback *3) Disabled Enabled *3 Disabled *4 Native VFR ON Disabled Native recording CAMERA (VFR OFF) 24PN, 30PN OFF (Enabled at playback *3) Standard VFR NORMAL ON Enabled *3 Enabled Enabled Standerd recording Other than 24PN and 30PN OFF Enabled Enabled Enabled *3 (VFR OFF) *3 DV/DVCPRO only. Disabled in AVC-Intra mode. *4 Enabled in PAUSE mode after LOOP REC. *5 24P and 30P indicate recording at 23.98P and 29.97P, respectively, while 60P and 60i indicate recording at 59.94P and 59.94i, respectively. Native mode records active frames only. Selecting video output The table below lists available video output formats. Use the setting menus listed below to select video output. Setting menu Setting SDI SELECT Select the signal format (from AUTO, 1080i, 480i) to be output via (OUTPUT SEL screen) the SDI OUT connector *6. Select the setup level for the signal (composite) output via the VIDEO OUT connector. SETUP 0%: 0% setup level for both output and recording (SYSTEM SETUP screen) 7.5%A: 7.5% setup level for output only (0% for recording) The SETUP menu setting is enabled also during playback. DOWNCON MODE Select the screen type for down-converted output (VIDEO OUT and SDI SELECT output (OUTPUT SEL screen) as 480i) of HD mode (1080i, 720P). *6 HD (1080i, 720P) output cannot display thumbnails and SDI OUT outputs black screen. 45