Panasonic HPX300 Operating Instructions - Page 86
Preparation, Power Supply, Mounting the Battery and Setting the Battery Type, Preparation
UPC - 791871304297
View all Panasonic HPX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Chapter 5 Preparation Chapter 5 Preparation Power Supply A battery or an external DC power supply can be used as the power supply for the camera-recorder. 2 Insert the battery and slide it in the direction of the arrow. Using a Battery Release lever The following is a list of batteries that have been tested and verified to work with the camera. Anton/Bauer batteries PROPAC14, TRIMPACK14 HYTRON50, HYTRON140 DIONIC90, DIONIC160 IDX batteries NP-L7, ENDURA7, ENDURA10 Sony batteries BP-GL65/95 PAG batteries PAGL95 NOTE • Although other batteries may be used by changing the menu setting, it is recommended that you use batteries that have been tested and verified to work with camera. • Charge the battery with the battery charger before using it. (Please refer to the battery charger's instruction manual for information about charging.) NOTE Removing the battery Completely push down and hold the release lever on the battery holder. Then, slide the battery in the opposite direction to the arrow while holding the lever down. Mounting the Battery and Setting the Battery Type Using an Anton/Bauer Battery 3 Set the battery type. • Select the battery type listed under BATTERY SELECT. Select the menu option BATTERY SELECT from the setting menu BATTERY SETUP screen. 1 Mount an Anton/Bauer battery. Power supply output connector for lighting Anton/Bauer Battery Lighting control switch NOTE The Anton/Bauer battery holder includes both a power supply output connector for lighting and a lighting control switch, which are convenient when attaching a light. Please contact Anton/Bauer for information about the lighting system. 86