Panasonic HPX300 Operating Instructions - Page 43
Adjustments and Settings for Recording, Selecting recording signals
UPC - 791871304297
View all Panasonic HPX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Chapter 4 Adjustments and Settings for Recording Chapter 4 Adjustments and Settings for Recording Selecting recording signals This camera records HD (1080i, 720P) signals using AVC-Intra or DVCPRO HD codecs and use a combination of DVCPRO50, DVCPRO or DV codecs for recording SD (480i) signals. It provides a variety of capture frame rates and recording frame rates (native recording) to suit specific applications. Select recording and recording signal in the setting menus listed below. Screen Setting menu Setting Selects the 1080i, 720P or 480i signal format. SYSTEM MODE To change this setting, wait until TURN POWER OFF appears before turning the power off and then turn it back on again. REC SIGNAL Selects to record using this camera or from the DVCPRO/DV connector. SYSTEM SETUP screen Selects AVC-Intra or DVCPRO HD codec and 60i, 60P, 30PN or 24PN REC FORMAT native recording in HD mode. Selects DVCPRO50, DVCPRO or DV codec in SD mode. CAMERA MODE Selects 60i, 30P, 24P or 24PA pulldown recording in 1080i or 480i mode. ASPECT CONV Selects the video aspect ratio for recording and output in SD mode (480i). Setting this function to ON in 720P mode starts variable frame rate capture VFR which records at the frame rate set in the FRAME RATE option. SCENE FILE screen For details, refer to [Variable Frame Rate (VFR) Recording] (page 35) FRAME RATE When the VFR option is set to ON, select the frame rate for variable frame rate recording. NOTE • Changing the menu options SYSTEM MODE, REC SIGNAL, REC FORMAT and CAMERA MODE may distort video and audio, but this is not a malfunction. 43