Home » Panasonic Manuals » Video Cameras » Panasonic HPX300 » Manual Viewer

Panasonic HPX300 Operating Instructions - Page 128

Sw Mode Screen, Slot Sel, Shot Mark, Mag A. Lvl, Pre Rec

UPC - 791871304297

Add to My Manuals
Save this manual to your list of manuals

Page 128 highlights

SW MODE screen Chapter 7 Menu Operations Item LOW GAIN MID GAIN HIGH GAIN ATW ATW TYPE W.BAL.PRESET USER MAIN USER1 USER2 RET SW WFM 128 Setting Sets the gain value assigned to the L position of the GAIN switch. -3dB, 0dB, 3dB, 6dB, 9dB, 12dB Sets the gain value assigned to the M position of the GAIN switch. -3dB, 0dB, 3dB, 6dB, 9dB, 12dB Sets the gain value assigned to the H position of the GAIN switch. -3dB, 0dB, 3dB, 6dB, 9dB, 12dB Allows you to assign the ATW (Auto Tracking White Balance) function to the WHITE BAL switch. (For details, refer to page 49.) Bch: Controls the ATW function when the WHITE BAL switch is set to B position. OFF: Does not assign the ATW function to the WHITE BAL switch. Selects type of ATW (Auto Tracking White Balance) function operation. 1: Standard ATW operation 2: Further restricts the color of the light source range that is tracked than setting 1. ATW operation reduces the risk of miscalculating light sources. Sets the color temperature assigned to the PRST position of the WHITE BAL switch. 3.2K, 5.6K Sets the function assigned to the USER MAIN button. REC REVIEW, SPOTLIGHT, BACKLIGHT, ATW, ATWLOCK, GAIN: 24 dB, Y GET, DRS, TEXT MEMO, SLOT SEL, SHOT MARK, MAG A. LVL, PRE REC, PC MODE, WFM, FBC For details, refer to [Assigning functions to USER buttons] (page 53). Sets a function assigned to the USER1 button. The functions that can be assigned to this button are the same as for the USER MAIN button. BACKLIGHT (factory default setting) For details, refer to [Assigning functions to USER buttons] (page 53). Sets a function assigned to the USER2 button. The functions that can be assigned to this button are the same as for the USER MAIN button. TEXT MEMO (factory default setting) For details, refer to [Assigning functions to USER buttons] (page 53). Sets the function assigned to the RET button on the lens. REC REVIEW, TEXT MEMO, SHOT MARK Selects the waveform displayed in the LCD monitor when the user button to which WFM has been assigned is pressed. WAVE: Displays a waveform. VECTOR: Vectorscope display WAVE/VECT: Each press of the button, switches the settings in the following order: OFF  WAVE (waveform)  VECTOR  OFF. Notes • A USER button to which ATW has been assigned cannot be used to turn ATW off when the WHITE BAL switch is set to B position and this menu is set to Bch. • W hen a remote controller (AJ-RC10G) is connected, the SPOTLIGHT and BACKLIGHT functions are not available. ____ indicates the factory setting

Section	Page
Read this first!	2
Precautions for Use	4
Chapter 1 Overview	8
Camera Unit Features	8
Recording and Playback Features	10
Outline of operations	12
Saving and editing on external devices	12
System Conﬁguration	13
Standard accessories	14
Chapter 2 Parts and Their Functions	15
Power Supply and Accessory Mounting Section	15
Audio (input) Function Section	16
Audio (output) Function Section	17
Shooting and Recording/Playback Functions Section	18
Menu/Thumbnail Operation Section	22
Time Code Section	23
Warning and Status Display Functions	24
LCD Monitor	24
Viewfinder	25
Chapter 3 Recording and Playback	26
Setting Date and Time of Internal Clock	26
P2 Cards	28
Inserting P2 Cards	28
Removing P2 Cards	28
To Prevent Accidental Erasure of P2 Card Content	29
P2 CARD ACCESS LED and status of P2 cards	29
P2 card recording times	30
Handling P2 Card Recording	31
Basic Procedures	32
Shooting	33
Normal Recording	33
Standard and Native Recording	34
Standard recording (pull-down recording)	34
Native recording	34
Variable Frame Rate (VFR) Recording	35
Native VFR Recording	35
Standard VFR recording(pulldown recording)	35
Using VFR Recording Function	36
Special Recording Modes	38
Pre-recording (PRE REC)	38
Interval recording (INTERVAL REC)	39
One-shot recording (ONE SHOT REC)	39
Loop recording (LOOP REC)	40
PROXY Recording Function (Optional)	40
Hot Swap Recording	40
REC REVIEW Function	40
Shot Marker (SHOT MARK) Recording Function	41
Text Memo Recording Function	41
Normal and Variable Speed Playback	42
Chapter 4 Adjustments and Settings for Recording	43
Selecting recording signals	43
List of recording formats and functions	44
Recording settings and recording function table	45
Selecting video output	45
List of recording, playback and output formats	46
Adjusting the White Balance and Black Balance	48
Adjusting the White Balance	48
Adjusting the Black Balance	49
Setting the Electronic Shutter	51
Setting the Shutter Mode and Speed	51
Placing the Camera-recorder in SYNCHRO SCAN Mode	51
FBC (Flash Band Compensation) Function	52
Setting FBC function	52
Assigning functions to USER buttons	53
Selecting Audio Input Signals and Adjusting Recording Levels	54
Selecting Audio Input Signals	54
Adjusting Recording Levels	54
Selecting Function for the FRONT AUDIO LEVEL Control	55
CH3 and CH4 Recording Levels	55
Setting Time Data	56
Recording time codes and user bits	57
Setting user bits	58
Entering the User Bits	58
Setting the Time Code	60
Externally Locking the Time Code	62
Outputting the time code externally	63
GENLOCK and time code input/output connection and setup	64
Counter Setting and Display	64
Viewfinder Screen Status Displays	65
Viewfinder Status Indication Layout	65
Selecting Viewfinder Display Information	65
Screen displays	66
Center Information Display	69
Checking and displaying shooting status	71
MODE CHECK indication	72
Center marker display	73
Safety zone markers	73
Audio level meter magnification	73
Zebra pattern display	74
Focus assist function	75
Adjusting and setting the LCD monitor	76
Waveform monitor function	77
Adjusting and Setting up the Viewfinder	78
Adjusting Right and Left Viewfinder Position	78
Diopter Adjustment	78
Using the Viewfinder	78
Emphasizing Image Outlines	79
Setting the viewfinder to monochrome mode	79
Handling setup data	80
Configuration of setup data files	80
Handling SD memory cards	81
Formatting, Writing and Reading an SD memory card	81
How to Use Scene File Data	82
Saving scene files and other settings on SD memory cards	84
Chapter 5 Preparation	86
Power Supply	86
Mounting the Battery and Setting the Battery Type	86
Use of the external DC power supply	88
Mounting and Adjusting the Lens	89
Mounting the Lens	89
Adjusting the Lens Flange Back	90
White Shading Compensation	91
Setting Chromatic Aberration Compensation (CAC)	92
Preparing for Audio Input	95
When Using the Front Microphone	95
Using a wireless receiver	95
When Using Audio Devices	96
Attaching Accessories	97
Mounting the Camera on a Tripod	97
Attaching the Shoulder Strap	97
Attaching the Rain Cover	98
Attaching the FRONT AUDIO LEVEL Control Knob	98
Attaching the Eye Cup	98
DC OUT Connector and External REC Start/Stop Switch Connection	99
Connecting the AJ-RC10G Remote Controller	100
Chapter 6 Manipulating Clips with Thumbnails	101
Thumbnail Operations	101
Thumbnail Manipulations Overview	101
Thumbnail Screen	102
Selecting Thumbnails	104
Playing back Clips	104
Switching the Thumbnail Display	105
Changing thumbnails	106
Shot Mark	106
Text Memo	107
Deleting Clips	108
Restoring Clips	109
Reconnection of Incomplete Clips	109
Copying Clips	109
Setting of Clip Meta Data	110
Setting of Proxy (optional)	114
Formatting a P2 Card	114
Formatting SD memory cards	115
Setting the Thumbnail Display Mode	115
Properties	116
Chapter 7 Menu Operations	120
Viewfinder and LCD Menus	120
Using the menus	120
Initializing the menu settings	121
Setup menu structure	122
Setup menu list	124
SCENE FILE screen	124
SYSTEM SETUP screen	126
SW MODE screen	128
RECORDING SETUP screen	129
AUDIO SETUP screen	130
OUTPUT SEL screen	132
DISPLAY SETUP screen	132
BATTERY SETUP screen	134
CARD FUNCTIONS screen	136
LENS SETUP screen	136
OTHER FUNCTIONS screen	137
DIAGNOSTIC screen	138
OPTION MENU screen	138
Chapter 8 Connecting to External Devices	139
Functionality Provided by Connections to USB 2.0 Connector	139
Connecting to a computer in USB device mode	139
USB host mode	140
Connections to the DVCPRO/DV Connector	145
Recording signals input to the DVCPRO/DV connector	145
Control of external devices through 1394 connection	146
Chapter 9 Maintenance and Inspections	147
Inspections Before Shooting	147
Preparing for Inspections	147
Inspecting the Camera Unit	147
Inspecting the Memory Recording Functions	148
Maintenance	150
Eyepiece Care	150
Cleaning Inside the Viewfinder	150
Charging the internal battery	150
Warning System	151
Warning Description Tables	151
Warning and Error Display for Thumbnail Operation and USB HOST MODE	153
Updating the firmware incorporated into the unit	155
Chapter 10 Index	156
Chapter 11 Specifications	160
Dimensions and specifications	160
Dimensions	160
Specifications	160

Match case Limit results 1 per page

1±¸

Chapter²·² Menu²Operations

SW MODE screen

Item

Setting

Notes

LOW GAIN

Sets the gain value assigned to the L position of the

GAIN switch.

–3dB, 0dB, 3dB, 6dB, 9dB, 12dB

MID GAIN

Sets the gain value assigned to the M position of the

GAIN switch.

–3dB, 0dB, 3dB, 6dB, 9dB, 12dB

HIGH GAIN

Sets the gain value assigned to the H position of the

GAIN switch.

–3dB, 0dB, 3dB, 6dB, 9dB, 12dB

ATW

Allows you to assign the ATW (Auto Tracking White

Balance) function to the WHITE BAL switch. (For

details, refer to page 49.)

Bch:

Controls the ATW function when the WHITE BAL

switch is set to B position.

OFF:

Does not assign the ATW function to the WHITE

BAL switch.

• A USER button to which ATW has

been assigned cannot be used to turn

ATW off when the WHITE BAL switch is

set to B position and this menu is set

to Bch.

ATW TYPE

Selects type of ATW (Auto Tracking White Balance)

function operation.

Standard ATW operation

Further restricts the color of the light source range

that is tracked than setting 1.

ATW operation reduces the risk of miscalculating light

sources.

W.BAL.PRESET

Sets the color temperature assigned to the PRST

position of the WHITE BAL switch.

3.2K, 5.6K

USER MAIN

Sets the function assigned to the USER MAIN button.

REC REVIEW, SPOTLIGHT, BACKLIGHT, ATW,

ATWLOCK, GAIN: 24 dB, Y GET, DRS, TEXT MEMO,

SLOT SEL, SHOT MARK, MAG A. LVL, PRE REC,

PC MODE, WFM, FBC

For details, refer to [Assigning functions to USER

buttons] (page 53).

• When a remote controller (AJ-RC10G)

is connected, the SPOTLIGHT

and BACKLIGHT functions are not

available.

USER1

Sets a function assigned to the USER1 button.

The

functions that can be assigned to this button are the

same as for the USER MAIN button.

BACKLIGHT

(factory default setting)

For details, refer to [Assigning functions to USER

buttons] (page 53).

USER2

Sets a function assigned to the USER2 button.

The

functions that can be assigned to this button are the

same as for the USER MAIN button.

TEXT MEMO

(factory default setting)

For details, refer to [Assigning functions to USER

buttons] (page 53).

RET SW

Sets the function assigned to the RET button on the

lens.

REC REVIEW, TEXT MEMO, SHOT MARK

WFM

Selects the waveform displayed in the LCD monitor

when the user button to which WFM has been

assigned is pressed.

WAVE:

Displays a waveform.

VECTOR:

Vectorscope display

WAVE/VECT:

Each press of the button, switches

the settings in the following order: OFF



WAVE

(waveform)



VECTOR



OFF.

____ indicates the factory setting