Panasonic HPX300 Operating Instructions - Page 74
Zebra pattern display, Setting, Description
UPC - 791871304297
View all Panasonic HPX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Chapter 4 Adjustments and Settings for Recording Zebra pattern display The AG-HPX300P can display two zebra patterns. Turning the ZEBRA switch on displays the zebra pattern set in the menu in the viewfinder and LCD monitor. A menu setting makes it possible to also display the zebra pattern on video output via the VIDEO OUT connector. OUTPUTSEL screen Item Setting Description ON: Displays the zebra pattern VIDEO OUT ZEBRA shown on the LCD monitor and viewfinder of this camera also in video output via the VIDEO OUT connector. OFF: The zebra pattern is not displayed in video output Specifies whether or not the zebra pattern is superimposed on VIDEO OUT signals. from the VIDEO OUT connector. ZEBRA switch Use the DISPLAY SETUP screen to set the level of zebra pattern display. Item Setting Description ZEBRA1 DETECT 50%...70%...109% Sets the level of the right-leaning zebra pattern 1. ZEBRA2 DETECT 50%...85%...109% Sets the level of the left-leaning zebra pattern 2. ZEBRA2 ON, SPOT, OFF Selects the ZEBRA2 type. Underlined values indicate factory defaults. SPOT: A video level between ZEBRA1 and ZEBRA2 displays a zebra pattern. Image level ON 109% ZEBRA 2 OFF SPOT ZEBRA 2 DETECT ZEBRA 1 DETECT 0% To display a zebra pattern on video output via the VIDEO OUT connector, make the required settings in the OUTPUT SEL screen. 74