Panasonic HPX300 Operating Instructions - Page 79
Emphasizing Image Outlines, Setting the viewfinder to monochrome mode, EVF SETTING, EVF B. LIGHT - factory reset
UPC - 791871304297
View all Panasonic HPX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Chapter 4 Adjustments and Settings for Recording NOTE • Pressing the RESET button when an adjustable value is selected in the setting menu EVF SETTING will return that setting to its factory default. • The LCD monitor will appear darker than usual if the camera recorder is cold when it is turned on. The display will return to its normal brightness as it warms up. • The issues described below are viewfinder phenomena that may occur under certain conditions but do not indicate a malfunction. Nor do they affect recording or output signals. - Primary colors (red, blue and green) may be seen when moving eye position in the viewfinder. - At low temperature, the screen image may have an irregular pink cast. - When the camera is off, there may be black stripes across the screen. They disappear when the camera is turned on. • Image lag may increase at low temperatures, but this is not a malfunction. Emphasizing Image Outlines Emphasizing outlines of images in the viewfinder and on the LCD monitor makes it easier to focus. This function does not affect video output from the camera or video recorded by the camera. 1 Adjust EVF PEAK LEVEL and EVF PEAK FREQ in the DISPLAY SETUP screen. DISPLAY SETUP EVF PEAK LEVEL EVF PEAK FREQ EVF SETTING EVF B. LIGHT EVF COLOR ZEBRA1 DETECT ZEBRA2 DETECT ZEBRA2 0 LOW >>> NORMAL ON 100% 85% SPOT PUSH MENU TO RETURN Setting the viewfinder to monochrome mode Set the menu option EVF COLOR to OFF in the DISPLAY SETUP screen to change the viewfinder to monochrome mode. 79