Panasonic HPX300 Operating Instructions - Page 89

Mounting and Adjusting the Lens, Mounting the Lens

Page 89 highlights

Chapter 5 Preparation Mounting and Adjusting the Lens Mounting the Lens 3 Lower the lens lever to firmly tighten the lens. 1 Raise the lens clamping lever and remove the mount cap. Lens Clamping Lever Mount Cap 4 Secure the cable through the cable clamp, and plug it into the LENS connector. 2 To mount the lens, align the indentation at the top center of the lens mount with the center mark of the lens. Mark Cable clamp LENS Connector For details on the current provided by the lens terminal, refer to page 165. 5 Adjust the lens flange back. For details, refer to [Adjusting the Lens Flange Back] (page 90).  NOTE • Please refer to the lens instruction manual for guidance on lens handling. • When the lens is removed, install the mount cap to protect the device. 89

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166

¸¹
Chapter²µ² Preparation
Mounting and Adjusting the Lens
Mounting the Lens
1
²
Raise²the²lens²clamping²lever²and²remove²the²
mount²cap.
Mount²Cap
Lens²Clamping²Lever
2
²
To²mount²the²lens,²align²the²indentation²at²the²
top²center²of²the²lens²mount²with²the²center²
mark²of²the²lens.
Mark
3
²
Lower²the²lens²lever²to²firmly²tighten²the²lens.
4
²
Secure²the²cable²through²the²cable²clamp,²and²
plug²it²into²the²LENS²connector.
LENS²Connector
Cable²
clamp
For details on the current provided by the lens
terminal, refer to page 165.
5
²
Adjust²the²lens²flange²back.
For details, refer to [Adjusting the Lens Flange
Back] (page 90).
NOTE
• Please refer to the lens instruction manual for
guidance on lens handling.
• When the lens is removed, install the mount cap to
protect the device.