Panasonic HPX300 Operating Instructions - Page 73
Center marker display, Safety zone markers, Audio level meter magnification, Channel display
UPC - 791871304297
View all Panasonic HPX300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Chapter 4 Adjustments and Settings for Recording Center marker display A center marker is displayed when the menu option MARKER in the DISPLAY SETUP screen is set to ON. NOTE The center marker display appears only on the LCD monitor and in the viewfinder. It is not superimposed on signals output via the VIDEO OUT and SDI OUT connectors. Safety zone markers A safety zone marker is displayed when the menu option SAFETY ZONE is selected in the DISPLAY SETUP screen. • OFF: Not displayed • 90%: indicates the display area on a normal household TV • 4:3: Indicates display area available at a 4:3 aspect ratio. • 13:9: Indicates the display area available at a 13:9 aspect ratio. • 14:9: Indicates the display area available at a 14:9 aspect ratio. Audio level meter magnification Press the user button to which MAG A. LVL has been assigned to display a magnification of the audio level meter (available also when LEVEL METER in the DISPLAY SETUP menu is set to OFF). Press the button again to return to normal audio level meter size. Turning on MODE CHECK during audio level meter magnification clears the audio level meter display. After MODE CHECK use, the audio level meter reappears at normal size. TC 1 2 : 3 4 : 5 6 : 2 3 12 P2 LACK I - PAUSE 1394 � 1080 i AVC-I 100 1 9 9 9 min B 9 0 % D I ONC 1 6 0 USER - 1 PROXY L T . BOX P 3 .2K 0 dB ND 1 W.L. : C H 1 -30 -20 -10 0 dB REAR : C H 2 21 34 5 1 Channel display This displays the currently monitored audio channel. 2 Input system display This displays the audio input system (AUDIO IN switch). • FRONT • W.L. (WIRELESS) • REAR 3 Standard level bar This bar indicates a -20 dB or -18 dB headroom level depending on the menu option HEADROOM setting in the AUDIO SETUP menu. 4 Peak hold display Holds the audio peak level indication for 1 second. 5 Excessive level indicator An audio level that is set too high is indicated in red. NOTE • The safety zone is not displayed when 4:3, 13:9 or 14:9 is selected when SYSTEM MODE is set to 480-59.94i and ASPECT CONV is set to SIDE CROP or LETTER BOX. • Safety zone markers appear only on the LCD monitor and in the viewfinder. They are not superimposed on signals output via the VIDEO OUT and SDI OUT connectors. 73