Home » Panasonic Manuals » Video Cameras » Panasonic HPX300 » Manual Viewer

Panasonic HPX300 Operating Instructions - Page 131

Setting, Notes, Normal, Always, Chsel, On, Off, Stereo, Mix, 40db, -50db, 18db, Single, Ch1/ch2

UPC - 791871304297

Add to My Manuals
Save this manual to your list of manuals

Page 131 highlights

Item 25M REC CH SEL TEST TONE F.MIC POWER R.MIC POWER MONITOR SELECT F.MIC LEVEL R.MIC CH1 LEVEL R.MIC CH2 LEVEL HEADROOM WIRELESS WARN WIRELESS TYPE 1394 AUDIO OUT Setting Notes Selects the audio channels to be recorded in the • Not available in the following DVCPRO and DV formats. conditions. 2CH: Only recorded on CH1 and CH2. - W hen SYSTEM MODE is 1080i-59.94i 4CH: Records on all four channels. or 720-59.94P. - When SYSTEM MODE is set to 480- 59.94i and REC FORMAT is set to the DVCPRO50 codec. - REC SIGNAL is set to 1394 (operation depends on 1394 input status). Selects the test signal. NORMAL: Outputs test tones to channels 1, 2, 3 and 4 when the OUTPUT/AUTO KNEE selector switch is set to BARS and the AUDIO IN switch CH1 is set to FRONT. ALWAYS: Outputs test tones to channels 1, 2, 3 and 4 at all times when the OUTPUT/AUTO KNEE selector switch is set to BARS. CHSEL: Outputs test tones to channels selected by setting the AUDIO IN switch CH1 or CH2 to FRONT and the OUTPUT/AUTO KNEE selector switch is set to BARS. (Test tones are not output to CH3 and CH4.) OFF: Does not output a test tone. Turns on and off the phantom power supply for the front microphone. ON, OFF Turns on and off the phantom power supply for the rear microphone. ON: Turns on the phantom power supply to the microphone when the rear LINE/MIC/+48V switch is set to +48V. OFF: Does not supply phantom power to the microphone even when the rear LINE/MIC/+48V switch is set to +48V. Switches the output signal to AUDIO OUT, earphones and speaker when the MONITOR SELECT switch is set to ST. STEREO, MIX Selects the input level for the front microphone. -40dB, -50dB, -60dB Selects the input level for the rear microphone connected to CH1. -50dB, -60dB Selects the input level for the rear microphone connected to CH2. -50dB, -60dB Sets the headroom (standard level). 18dB, 20dB Sets whether a warning should be output when wireless receiver reception is poor. ON, OFF Selects wireless receiver type. SINGLE: 1-channel receiver DUAL: 2-channel receiver • W hen DUAL is selected for a 1-channel wireless receiver, CH2 and CH4 will stay mute. Selects audio channel output to 1394 OUT in DVCPRO • Available only when SYSTEM MODE is or DV mode. set to 480-59.94i and REC FORMAT is CH1/CH2, CH3/CH4 set to DVCPRO or DV. ____ indicates the factory setting 131 Chapter 7 Menu Operations

Section	Page
Read this first!	2
Precautions for Use	4
Chapter 1 Overview	8
Camera Unit Features	8
Recording and Playback Features	10
Outline of operations	12
Saving and editing on external devices	12
System Conﬁguration	13
Standard accessories	14
Chapter 2 Parts and Their Functions	15
Power Supply and Accessory Mounting Section	15
Audio (input) Function Section	16
Audio (output) Function Section	17
Shooting and Recording/Playback Functions Section	18
Menu/Thumbnail Operation Section	22
Time Code Section	23
Warning and Status Display Functions	24
LCD Monitor	24
Viewfinder	25
Chapter 3 Recording and Playback	26
Setting Date and Time of Internal Clock	26
P2 Cards	28
Inserting P2 Cards	28
Removing P2 Cards	28
To Prevent Accidental Erasure of P2 Card Content	29
P2 CARD ACCESS LED and status of P2 cards	29
P2 card recording times	30
Handling P2 Card Recording	31
Basic Procedures	32
Shooting	33
Normal Recording	33
Standard and Native Recording	34
Standard recording (pull-down recording)	34
Native recording	34
Variable Frame Rate (VFR) Recording	35
Native VFR Recording	35
Standard VFR recording(pulldown recording)	35
Using VFR Recording Function	36
Special Recording Modes	38
Pre-recording (PRE REC)	38
Interval recording (INTERVAL REC)	39
One-shot recording (ONE SHOT REC)	39
Loop recording (LOOP REC)	40
PROXY Recording Function (Optional)	40
Hot Swap Recording	40
REC REVIEW Function	40
Shot Marker (SHOT MARK) Recording Function	41
Text Memo Recording Function	41
Normal and Variable Speed Playback	42
Chapter 4 Adjustments and Settings for Recording	43
Selecting recording signals	43
List of recording formats and functions	44
Recording settings and recording function table	45
Selecting video output	45
List of recording, playback and output formats	46
Adjusting the White Balance and Black Balance	48
Adjusting the White Balance	48
Adjusting the Black Balance	49
Setting the Electronic Shutter	51
Setting the Shutter Mode and Speed	51
Placing the Camera-recorder in SYNCHRO SCAN Mode	51
FBC (Flash Band Compensation) Function	52
Setting FBC function	52
Assigning functions to USER buttons	53
Selecting Audio Input Signals and Adjusting Recording Levels	54
Selecting Audio Input Signals	54
Adjusting Recording Levels	54
Selecting Function for the FRONT AUDIO LEVEL Control	55
CH3 and CH4 Recording Levels	55
Setting Time Data	56
Recording time codes and user bits	57
Setting user bits	58
Entering the User Bits	58
Setting the Time Code	60
Externally Locking the Time Code	62
Outputting the time code externally	63
GENLOCK and time code input/output connection and setup	64
Counter Setting and Display	64
Viewfinder Screen Status Displays	65
Viewfinder Status Indication Layout	65
Selecting Viewfinder Display Information	65
Screen displays	66
Center Information Display	69
Checking and displaying shooting status	71
MODE CHECK indication	72
Center marker display	73
Safety zone markers	73
Audio level meter magnification	73
Zebra pattern display	74
Focus assist function	75
Adjusting and setting the LCD monitor	76
Waveform monitor function	77
Adjusting and Setting up the Viewfinder	78
Adjusting Right and Left Viewfinder Position	78
Diopter Adjustment	78
Using the Viewfinder	78
Emphasizing Image Outlines	79
Setting the viewfinder to monochrome mode	79
Handling setup data	80
Configuration of setup data files	80
Handling SD memory cards	81
Formatting, Writing and Reading an SD memory card	81
How to Use Scene File Data	82
Saving scene files and other settings on SD memory cards	84
Chapter 5 Preparation	86
Power Supply	86
Mounting the Battery and Setting the Battery Type	86
Use of the external DC power supply	88
Mounting and Adjusting the Lens	89
Mounting the Lens	89
Adjusting the Lens Flange Back	90
White Shading Compensation	91
Setting Chromatic Aberration Compensation (CAC)	92
Preparing for Audio Input	95
When Using the Front Microphone	95
Using a wireless receiver	95
When Using Audio Devices	96
Attaching Accessories	97
Mounting the Camera on a Tripod	97
Attaching the Shoulder Strap	97
Attaching the Rain Cover	98
Attaching the FRONT AUDIO LEVEL Control Knob	98
Attaching the Eye Cup	98
DC OUT Connector and External REC Start/Stop Switch Connection	99
Connecting the AJ-RC10G Remote Controller	100
Chapter 6 Manipulating Clips with Thumbnails	101
Thumbnail Operations	101
Thumbnail Manipulations Overview	101
Thumbnail Screen	102
Selecting Thumbnails	104
Playing back Clips	104
Switching the Thumbnail Display	105
Changing thumbnails	106
Shot Mark	106
Text Memo	107
Deleting Clips	108
Restoring Clips	109
Reconnection of Incomplete Clips	109
Copying Clips	109
Setting of Clip Meta Data	110
Setting of Proxy (optional)	114
Formatting a P2 Card	114
Formatting SD memory cards	115
Setting the Thumbnail Display Mode	115
Properties	116
Chapter 7 Menu Operations	120
Viewfinder and LCD Menus	120
Using the menus	120
Initializing the menu settings	121
Setup menu structure	122
Setup menu list	124
SCENE FILE screen	124
SYSTEM SETUP screen	126
SW MODE screen	128
RECORDING SETUP screen	129
AUDIO SETUP screen	130
OUTPUT SEL screen	132
DISPLAY SETUP screen	132
BATTERY SETUP screen	134
CARD FUNCTIONS screen	136
LENS SETUP screen	136
OTHER FUNCTIONS screen	137
DIAGNOSTIC screen	138
OPTION MENU screen	138
Chapter 8 Connecting to External Devices	139
Functionality Provided by Connections to USB 2.0 Connector	139
Connecting to a computer in USB device mode	139
USB host mode	140
Connections to the DVCPRO/DV Connector	145
Recording signals input to the DVCPRO/DV connector	145
Control of external devices through 1394 connection	146
Chapter 9 Maintenance and Inspections	147
Inspections Before Shooting	147
Preparing for Inspections	147
Inspecting the Camera Unit	147
Inspecting the Memory Recording Functions	148
Maintenance	150
Eyepiece Care	150
Cleaning Inside the Viewfinder	150
Charging the internal battery	150
Warning System	151
Warning Description Tables	151
Warning and Error Display for Thumbnail Operation and USB HOST MODE	153
Updating the firmware incorporated into the unit	155
Chapter 10 Index	156
Chapter 11 Specifications	160
Dimensions and specifications	160
Dimensions	160
Specifications	160

Match case Limit results 1 per page

1³1

Chapter²·² Menu²Operations

Item

Setting

Notes

25M REC CH SEL

Selects the audio channels to be recorded in the

DVCPRO and DV formats.

2CH:

Only recorded on CH1 and CH2.

4CH:

Records on all four channels.

• Not available in the following

conditions.

- When SYSTEM MODE is 1080i-59.94i

or 720-59.94P.

- When SYSTEM MODE is set to 480-

59.94i and REC FORMAT is set to the

DVCPRO50 codec.

- REC SIGNAL is set to 1394

(operation depends on 1394 input

status).

TEST TONE

Selects the test signal.

NORMAL:

Outputs test tones to channels 1, 2, 3 and

4 when the OUTPUT/AUTO KNEE selector switch is

set to BARS and the AUDIO IN switch CH1 is set to

FRONT.

ALWAYS:

Outputs test tones to channels 1, 2, 3 and

4 at all times when the OUTPUT/AUTO KNEE selector

switch is set to BARS.

CHSEL:

Outputs test tones to

channels selected by

setting the AUDIO IN switch CH1 or CH2 to FRONT

and the OUTPUT/AUTO KNEE selector switch is set to

BARS. (Test tones are not output to CH3 and CH4.)

OFF:

Does not output a test tone.

F.MIC POWER

Turns on and off the phantom power supply for the

front microphone.

ON, OFF

R.MIC POWER

Turns on and off the phantom power supply for the

rear microphone.

ON:

Turns on the phantom power supply to the

microphone when the rear LINE/MIC/+48V switch is

set to +48V.

OFF:

Does not supply phantom power to the

microphone even when the rear LINE/MIC/+48V switch

is set to +48V.

MONITOR SELECT

Switches the output signal to AUDIO OUT, earphones

and speaker when the MONITOR SELECT switch is

set to ST.

STEREO, MIX

F.MIC LEVEL

Selects the input level for the front microphone.

–40dB, –50dB, –60dB

R.MIC CH1 LEVEL

Selects the input level for the rear microphone

connected to CH1.

–50dB, –60dB

R.MIC CH2 LEVEL

Selects the input level for the rear microphone

connected to CH2.

–50dB, –60dB

HEADROOM

Sets the headroom (standard level).

18dB, 20dB

WIRELESS WARN

Sets whether a warning should be output when

wireless receiver reception is poor.

ON, OFF

WIRELESS TYPE

Selects wireless receiver type.

SINGLE:

1-channel receiver

DUAL:

2-channel receiver

• When DUAL is selected for a 1-channel wireless

receiver, CH2 and CH4 will stay mute.

1394 AUDIO OUT

Selects audio channel output to 1394 OUT in DVCPRO

or DV mode.

CH1/CH2, CH3/CH4

• Available only when SYSTEM MODE is

set to 480-59.94i and REC FORMAT is

set to DVCPRO or DV.

____ indicates the factory setting