Panasonic WVCU650 Operating Instructions - Page 10
Function buttons F1 to F4/F5 to F8, Recorder/Unit Selection button RECORDER/UNIT
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
@8 Shuttle hold button (SHUTTLE HOLD) • If you press this button while rotating the shuttle ring, playback speed will be maintained even after removing a hand from the shuttle ring. (The LED indicator on this button blinks during the fast playback.) Note: This operation differs from "Hold playback speed" performed by holding the shuttle ring of recorder. When you hold the playback speed from the system controller, the EL-ZOOM, MULTISCREEN, and OSD buttons are unavailable. • If you press this button again, normal playback speed is recovered. @9 History button (HISTORY) When you press the + or - button while holding down this button, camera images selected in the past are displayed in order or in reverse order. #0 - button [-] This button is pressed when selecting a camera with the lower channel number. During setup, this button is pressed to decrease the value of selected parameter. #1 + button [+] This button is pressed when selecting a camera with the higher channel number. During setup, this button is pressed to increase the value of selected parameter. #2 Recorder/Unit Selection button (RECORDER/UNIT) • Selects a recorder. • When you press while holding down the SHIFT button, this button selects a system unit. #3 Preset/Program preset button (PRESET/PGM PRESET) • Recalls a preset position or the home position of combination camera. • When you press while holding down the SHIFT button, this button programs preset positions. #4 Camera position button (CAM POSI) This button is pressed to select the camera position (the combination of camera number and preset position). #5 Numeric buttons (0, 1 to 9) Enters camera numbers, monitor numbers, or unit numbers, etc. #6 Monitor/Escape button (MON (ESC)) • Selects a monitor. • When pressed during setup, this button determines the current selection to return to the main menu. #7 Camera/Set button (CAM (SET)) • Selects a camera. • When pressed during setup, this button selects an item to go to a submenu. 10 #8 LCD (Liquid Crystal Display) Displays the numbers of unit, monitor and camera currently selected. The LCD also displays the functions assigned to F1 to F8 buttons. #9 Adjustment button (ADJUST) This button is pressed to perform the settings of LCD brightness, LCD contrast, alarm buzzer, or button buzzer. $0 Menu button (MENU) Displays the list of menu functions on the LCD. Menu functions are assignable to the function buttons (F1 to F4/F5 to F8) or joystick function buttons (A, B, and top buttons). $1 Function buttons (F1 to F4/F5 to F8) Recall button functions you assign. Note: When you press while holding down the SHIFT button, the F1 to F4 buttons become F5 to F8. $2 Exit button (EXIT) While a menu function, determined with the ENTER button, is being displayed on the LCD, this button is pressed to return to the upper menu. $3 Enter button (ENTER) While menu functions are displayed on the LCD, this button is determines a function to assign. $4 Feet When extending these feet, you can raise the front side by approx. 1 cm {0.39 in.}.