Panasonic WVCU650 Operating Instructions - Page 74

Troubleshooting

Get Panasonic WVCU650 - SYSTEM CONTROLLER ADDENDUM PDF manuals and user guides
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 74 highlights

TROUBLESHOOTING Check the following before requesting repair. If a trouble cannot be corrected even after checking and trying remedy, contact your dealer. Problem The power of system controller is not turned on. The brightness of LCD is not enough. / Characters do not appear on the LCD. Check item and Remedy The AC adapter may be disconnected from either the system controller or the AC outlet. Check the connection. The DC plug may not be firmly plugged into the DC 9 V Input jack of system controller. Check the connection. The display setting value of LCD may be improper. Check the setting. Reference Refer to p. 27. Refer to p. 27. Refer to p. 28. Login standby display does not appear on the LCD The settings of MODE switches at the rear panel may be wrong. Check the settings and turn on the power again. Refer to p. 18. The setting of CONTROLLER NO. switch may be wrong. Check the setting and turn on the power again. Refer to p. 18. Users cannot control cameras with the 3D joystick. You may have turned on the power while some buttons of system controller was held down. Check no buttons are being held down, and turn on the power again. The cable may be disconnected from either the main unit or 3D joystick unit. Check the connection. Refer to p. 27. Refer to p. 17. The combination codes of main unit and 3D joystick unit may not be identical. Check their combination codes. Refer to p. 17. Users who have logged into the system may not be authorized to control cameras with the 3D joystick. Check the user level settings of these users. Refer to pp. 62 to 65. Users cannot log into the system. Cables may be disconnected from either the DATA ports of system controller or other system units. Check the connections. Refer to p. 16. The line termination settings of MODE switches may be wrong. Check the settings and turn on the power again. You may have entered a wrong user ID. Reenter the user ID correctly. Refer to p. 18. Refer to p. 29. You may have entered a wrong pass- Refer to p. 29. word. If the password is wrong, the LCD will return to the login standby dis- play. Reenter the password correctly. 74

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
74
Refer to p. 27.
TROUBLESHOOTING
Check the following before requesting repair.
If a trouble cannot be corrected even after checking and trying remedy, contact your dealer.
Problem
Check item and Remedy
Reference
The power of system controller is not
turned on.
The AC adapter may be disconnected
from either the system controller or the
AC outlet. Check the connection.
The DC plug may not be firmly plugged
into the DC 9 V Input jack of system
controller. Check the connection.
Refer to p. 27.
The brightness of LCD is not enough. /
Characters do not appear on the LCD.
The display setting value of LCD may
be improper. Check the setting.
Refer to p. 28.
Login standby display does not appear
on the LCD
Users cannot control cameras with the
3D joystick.
Users cannot log into the system.
Cables may be disconnected from
either the DATA ports of system con-
troller or other system units. Check the
connections.
The line termination settings of MODE
switches may be wrong. Check the set-
tings and turn on the power again.
You may have entered a wrong user ID.
Reenter the user ID correctly.
You may have entered a wrong pass-
word. If the password is wrong, the
LCD will return to the login standby dis-
play. Reenter the password correctly.
Refer to p. 16.
Refer to p. 18.
Refer to p. 29.
Refer to p. 29.
The cable may be disconnected from
either the main unit or 3D joystick unit.
Check the connection.
Users who have logged into the system
may not be authorized to control cam-
eras with the 3D joystick. Check the
user level settings of these users.
Refer to pp. 62 to 65.
Refer to p. 17.
The settings of MODE switches at the
rear panel may be wrong. Check the
settings and turn on the power again.
Refer to p. 18.
The setting of CONTROLLER NO.
switch may be wrong. Check the setting
and turn on the power again.
Refer to p. 18.
You may have turned on the power
while some buttons of system controller
was held down. Check no buttons are
being held down, and turn on the power
again.
Refer to p. 27.
The combination codes of main unit and
3D joystick unit may not be identical.
Check their combination codes.
Refer to p. 17.