Panasonic WVCU650 Operating Instructions - Page 26
PS・Data Operator Password Check, PSD Password Check, Admin Password, No.01 User ID, Password
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
The LCD display of destination system controller(s) becomes as follows. Data Base Rx Mode Completed Sum=1733 Note: If the check sum is not identical, check the connection of all the controllers, and retry the data base copy. 12. Turn off the power of source and destination system controllers. ■ PS·Data Operator Password Check In case operators have forgotten their passwords, the administrator can check the passwords in the following procedure. ● Operation 1. Turn off the power. 2. Turn on the power of system controller while holding down the button 4 and MON (ESC) button. "Admin Password" will appear on the LCD to enter the password. PSD Password Check Admin Password _____ 3. Enter the administrator password. The password entered will be displayed as "∗" marks. PSD Password Check Admin Password Notes: • The factory default is "650". • If the password entered is wrong, the LCD display will return to Step 2. 4. Press the CAM (SET) button. If the password entered is correct, "User ID" and "Password" of Operator 1 will appear on the LCD while you are holding down the buttons. No.01 User ID 650 Password 650 5. To search a desired operator, rotate the JogDial. The user ID and password of Operator 1 to 16 will appear interchangeably. 6. Turn off the power. Rotate the JogDial. Operator 1 information No.01 User ID 650 Password 650 Rotate the JogDial. Operator 2 information No.02 User ID 1 Password 12345 Rotate the JogDial. • • Operator 16 information No.16 User ID 100 Password 100 26