Panasonic WVCU650 Operating Instructions - Page 28
Basic Operation Flow, LCD/BUZZER Adjustment, Brightness Level Adjustment, Alarm Buzzer Setting
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
■ Basic Operation Flow System Operation Alarm suspension or reset Login System Unit Selection Monitor Selection System Unit Setup and Operation Camera Selection Camera setup and control Logout Login Unit selection Monitor selection Camera selection Operation (Multiscreen segment switching and sequence Operation (Panning, Tilting, and zooming, etc.) Logout at the end of operation ■ LCD/BUZZER Adjustment You can perform the settings of LCD brightness, LCD contrast, alarm buzzer, or button buzzer as follows. 1. Press the ADJUST button to select a desired menu. Every pressing the button will display the brightness setting menu → contrast setting menu → alarm buzzer setting menu → button buzzer setting menu interchangeably. Note: If no adjustment has been performed for 5 seconds or more, these setting menus will automatically disappear and the LCD will return to the default status. 2. After adjustment, press the MON (ESC) or EXIT button. The LCD display will return to the default status. ● Brightness Level Adjustment You can change the brightness level by rotating the JogDial. Adjust the LCD brightness level while watching the LCD. LCD Bright 14 28 Note: 1 (lowest) to 20 (highest) are available. The factory default is 14. ● Contrast Level Adjustment You can change the contrast level by rotating the JogDial. Adjust the contrast level while watching the LCD. LCD Contrast 9 Note: 1 (highest) to 20 (lowest) are available. The factory default is 9. ● Alarm Buzzer Setting You can change the duration time of alarm buzzer sound by rotating the JogDial. Adjust the alarm buzzer setting while watching the LCD. Buzzer Alarm 2s Note: OFF, 1s (second), 2s, 3s, 4s, ..., 30s, 40s, 50s, and 60s are available. The factory default is 2s.