Panasonic WVCU650 Operating Instructions - Page 67

Note: To return to Step 3, rotate the shuttle ring counterclockwise or move the 3D joystick to the left. 5. Select a desired unit number by performing either of the following. • Rotate the JogDial clockwise or counterclockwise. • Press the + or - button. Cam-Unit Map 408 Cam016 Unit02 Note: You can select a unit number from 1 to 99. 6. Press the ENTER or CAM (SET) button. "Set OK?" will appear on the LCD. Cam-Unit Map 408 Cam016 Set OK? Note: To cancel the setting, press the EXIT or MON (ESC) button. The LCD display will return to Step 6. 7. Press the ENTER or CAM (SET) button again. The specified camera channel and unit number will be set for the selected camera-unit map. "Memory" will appear on the LCD for a few seconds, and the LCD display will return to Step 1. Cam-Unit Map 408 Cam016 Memory To delete a camera-unit map 1. Perform Step 1 and 4 in p. 66. 2. Press the CLEAR button. "Clear OK?" will appear on the LCD. Cam-Unit Map 408 Cam016 Clear OK? Note: To cancel deleting the setting, press the EXIT or MON (ESC) button. 3. Press the ENTER or CAM (SET) button. The camera-unit map will be deleted. "Erased" will appear on the LCD for a few seconds, and the LCD display will return to Step 3. Cam-Unit Map 408 Cam016 Erased Note: After all the camera-unit maps have been deleted, "Cam000" will appear for the camera channel area. ● Associating Recorder Numbers with Unit Numbers You can register HDD-unit maps (the association settings of recorder numbers and unit numbers). Up to 16 HDD-unit maps can be registered. You can select a recorder by entering a desired recorder number. Note: As the factory default, recorder numbers have been associated with unit numbers having the same numbers. ("HDD01" with "Unit01", "HDD02" with "Unit02"...) 1. Display "HDD-Unit Map" sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.) HDD-Unit Map 409 HDD01 Unit01 2. Select a desired recorder number by performing either of the following. • Rotate the JogDial clockwise or counterclockwise. • Press the + or - button. HDD-Unit Map 409 HDD06 Unit06 Note: You can select a recorder number from 1 to 16. 3 .Rotate the shuttle ring clockwise or move the 3D joystick to the right. The cursor will jump to the next item. Note: To return to Step 2, rotate the shuttle ring counterclockwise or move the 3D joystick to the left. 4. Select a desired unit number by performing either of the following. • Rotate the JogDial clockwise or counterclockwise. • Press the + or - button. HDD-Unit Map 409 HDD06 Unit05 Note: You can select a unit number from 1 to 99. 5. Press the ENTER or CAM (SET) button. "Set OK?" will appear on the LCD. HDD-Unit Map 409 HDD06 Set OK? Note: To cancel the setting, press the EXIT or MON (ESC) button. The LCD display will return to Step 4. 67