Panasonic WVCU650 Operating Instructions - Page 65

Camera Table3 406 Cam001 =E 4. Select a desired camera channel by performing one of the following. • Rotate the JogDial clockwise or counterclockwise. • Press the + or - button. • Enter the camera number with the numeric buttons. Camera Table3 406 Cam064 =E Note: You can select a camera channel from 1 to 256. 5. Rotate the shuttle ring clockwise or move the 3D joystick to the right. The cursor will jump to the next item. Camera Table3 406 Cam064 =E Note: To return to Step 4, rotate the shuttle ring counterclockwise or move the 3D joystick to the left. 6. Select E (= Enabled) or D (= Disabled) by performing either of the following. • Rotate the JogDial clockwise or counterclockwise. • Press the + or - button. Camera Table3 406 Cam064 =D E (= Enabled): The operator can display the camera image on the monitor and control panning/tilting. (VIEW & CONTROL) D (= Disabled): The operator can display the camera image on the monitor, but cannot control the panning/tilting. (VIEW ONLY) Note: To change the settings of other cameras, repeat Step 4 to 6. 7. Press the ENTER or CAM (SET) button. "Set OK?" will appear on the LCD. Camera Table3 406 Set OK? Note: To cancel the setting, press the EXIT or MON (ESC) button. The LCD display will return to Step 6. 8. Press the ENTER or CAM (SET) button again. The camera levels will be set for the selected table. "Memory" will appear on the LCD for a few seconds, and the LCD display will return to Step 1. Camera Table3 406 Memory ● Camera Position Registration or Clearing This system controller can memorize camera position numbers, which are the combination of camera numbers and preset position numbers. By entering a camera position number, you can select a desired camera and preset position at a time. You can register up to 1 000 camera position numbers. 1. Display "Cam Posi Map" sub menu. (Refer to Step 1 to 4 of p. 51 To Recall Menu Functions.) Cam Posi Map 407 Cam-P001 C--- Pre-- 2. Select a camera position number to register by performing one of the following. • Rotate the JogDial clockwise or counterclockwise. • Press the + or - button. • Enter the camera position number with the numeric buttons. Cam Posi Map 407 Cam-P016 C--- Pre-- Notes: • To register a new position number, press the numeric buttons. • You can select a camera position number from 0 to 999. 3. Rotate the shuttle ring clockwise or move the 3D joystick to the right. The cursor will jump to the next item. Note: To return to Step 2, rotate the shuttle ring counterclockwise or move the 3D joystick to the left. 4. Select a desired camera channel by performing one of the following. • Rotate the JogDial clockwise or counterclockwise. • Press the + or - button. • Enter the camera number with the numeric buttons. Cam Posi Map 407 Cam-P016 C005 Pre-- Note: You can select a camera channel from 1 to 999. 5. Rotate the shuttle ring clockwise or move the 3D joystick to the right. The cursor will jump to the next item. Note: To return to Step 4, rotate the shuttle ring coun- terclockwise or move the 3D joystick to the left. 65