Panasonic WVCU650 Operating Instructions - Page 30

■ If You Have Forgotten the Login Password Refer to the system administrator. ■ Operation Start (Auto Login) When auto login is set to ON, operators can log into the system without entering their passwords. The LCD display after power-on becomes as follows. (Refer to p. 61 for details on the setting.) 1. When the power is turned on, "Auto Login" appears on the LCD for a second. PS • Data Mode Auto Login 2. The user ID of auto login user appear on the LCD. Then, the operator will log into the system automatically. PS·Data Mode User ID = 650 Mon01 Cam128 Unit16 F1 F2 F3 F4 ■ Operation End (Logout) You need to log out from the system: • When finishing operation and turning off the power • When changing an operator 1. During the login status, press the LOGOUT button while holding down the SHIFT button. 2. You will log out of the system, and "Logout" will appear on the LCD. Then, the LCD returns to the login standby display. Logout PS·Data Mode No User Alarm sign after logout If power is being supplied even after logout, the current system status will be continuously informed by "Alarm sign" and the ALM SUSPEND indicator. If an alarm is newly activated after logout, "Alarm" sign will blink. (The blinking will change to steady light when the alarm is automatically reset.) Mon01 Cam128 HD316 F1 F2 F3 F4 Notes: • This illustration is an example in which the operator number is "650". • The smallest monitor, camera, and unit numbers are displayed on the LCD. • Three seconds after the unit number was determined, model number appears in place of unit number. • Due to security, the password is not displayed on the LCD. 30