Panasonic WVCU650 Operating Instructions - Page 20

All Reset, PS・Data Communication Setting, Operation

Get Panasonic WVCU650 - SYSTEM CONTROLLER ADDENDUM PDF manuals and user guides
UPC - 791871504277
View all Panasonic WVCU650 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

■ All Reset When the all reset mode is activated, all of the following settings will be reset to the factory default. • Administrator password • PS·Data communication setting • LCD brightness, contrast, alarm buzzer, and button buzzer settings • Button functions and joystick button functions (F1 to F8, A, B, and top buttons) • Controller functions (Time & Date Type) (Auto Login) (Operator Setup) (Function Level) (Camera Level) (Cam Posi Map) (Cam-Unit Map) (HDD-Unit Map) (LCD Title) Note: Calibration settings of panning, tilting, and zooming will be maintained even after all reset. ● Operation 1. Turn off the power. Note: If you set the MODE Switch #1 to #4 to ON, you can skip entering the administrator password in Step 3. 2. Turn on the power while holding down the buttons 2, 4, and 6. "Admin Password" will appear on the LCD to enter the password. All Reset Admin Password _____ 3. Enter the administrator password. The password entered will be displayed as "∗" marks. All Reset Admin Password 4. Press the CAM (SET) button. If the password entered is correct, all the settings will be reset to the factory default. All Reset 5. Check "End" on the LCD. Check "End" has appeared on the LCD to inform you of the initialization end. All Reset End 6. Turn off the power. ■ PS·Data Communication Setting This setting is required to establish a connection between the system units and system controller. List of PS·Data communication settings Setting Item Available setting parameter(s) Baud Rate 4800 / 9600 / 19200 bps Data Bit 8 bit (Fixed) Parity Bit None / Odd / Even Stop Bit 1 / 2 bit Wait Time OFF / 100 msec / 200 msec / 400 msec / 1000 msec Group Adr A to Z Xon/Xoff Not Use (Fixed) Note: Factory defaults are underlined. ● Operation 1. Turn off the power. 2. Turn on the power while holding down the button 6 and MON (ESC) button. "Admin Password" will appear on the LCD to enter the password. Notes: • The factory default is "650". • To delete a character, press the CLEAR button. • If you have entered a wrong password, the LCD display will return to Step 2. PS • Data Com. Setup Admin Password _____ 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
20
■
All Reset
When the all reset mode is activated, all of the following set-
tings will be reset to the factory default.
•
Administrator password
•
PS·Data communication setting
• LCD brightness, contrast, alarm buzzer, and button
buzzer settings
•
Button functions and joystick button functions (F1 to F8,
A, B, and top buttons)
•
Controller functions
(Time & Date Type)
(Auto Login)
(Operator Setup)
(Function Level)
(Camera Level)
(Cam Posi Map)
(Cam-Unit Map)
(HDD-Unit Map)
(LCD Title)
Note:
Calibration settings of panning, tilting, and zooming
will be maintained even after all reset.
●
Operation
1.
Turn off the power.
Note:
If you set the MODE Switch #1 to #4 to ON, you
can skip entering the administrator password in
Step 3.
2.
Turn on the power while holding down the buttons
2, 4, and 6.
“Admin Password” will appear on the LCD to enter the
password.
3.
Enter the administrator password.
The password entered will be displayed as “
∗
” marks.
Notes:
•
The factory default is “650”.
•
To delete a character, press the CLEAR button.
• If you have entered a wrong password, the LCD
display will return to Step 2.
4.
Press the CAM (SET) button.
If the password entered is correct, all the settings will
be reset to the factory default.
5.
Check “End” on the LCD.
Check “End” has appeared on the LCD to inform you of
the initialization end.
6.
Turn off the power.
■
PS·Data Communication Setting
This setting is required to establish a connection between
the system units and system controller.
List of PS·Data communication settings
Setting Item Available setting parameter(s)
Baud Rate
4800 / 9600
/ 19200 bps
Data Bit
8 bit
(Fixed)
Parity Bit
None
/ Odd / Even
Stop Bit
1
/ 2 bit
Wait Time
OFF
/ 100 msec / 200 msec /
400 msec / 1000 msec
Group Adr
A
to Z
Xon/Xoff
Not Use (Fixed)
Note:
Factory defaults are underlined.
●
Operation
1.
Turn off the power.
2.
Turn on the power while holding down the button 6
and MON (ESC) button.
“Admin Password” will appear on the LCD to enter the
password.
All Reset
Admin Password _____
All Reset
Admin Password
∗∗∗∗∗
All Reset
All Reset
End
•
PS Data Com. Setup
Admin Password _____